- Messages
- 8,133
- Location
- Near Evesham, Worcestershire
I'm sorry, not meaning to sound unkind but I don't understand the relevance?I picked up my Glory bFlat Tenor from amazon for about $300.
$300 for a never heard of brand? Your point is?
I'm sorry, not meaning to sound unkind but I don't understand the relevance?I picked up my Glory bFlat Tenor from amazon for about $300.
The OP said they were looking for a low budget horn I thought. The relevance was in that, It is not a no name horn. I have a glory Euphonium. These are my points.I'm sorry, not meaning to sound unkind but I don't understand the relevance?
$300 for a never heard of brand? Your point is?
By 'name' I mean not the cheap Chinese saxes.@DaveT - What "name" are you after?
A name we've heard of which may be average?
Or something with a good name, good reputation?
Or any old branded horn never heard of before?
If you let me know, I'll see what I can spot for you on my "travels" and PM you.
😉
OK, so basically you did exactly what I suggested folks NOT do. You purchased a project horn (a slightly anachronistic one at that, if in fact seller got it right and it is 1930's although I cannot remember seeing many a pre-war Orsi myself)...and now you are going to 'do it yourself'.I gave in and did a 'buy it now' on a very pretty alto sax. 1930s Orsi from Italy. £205 delivered.
I did bid on some scruffy old things to clean up and repair but they were going for far too much IMHO.
I've got the Saxophone Manual and lots of tools so if it needs major work I ought to be able to do it. At least it won't need a 4 foot long 3/4" drive breaker bar like my Hardley-Ableson does!
Everybody knows that you can’t get a decent sound out of a 1930s Orsi if you don’t retro fit a 4 foot long 3/4" drive breaker bar. I found a silver Orsi alto in a junk shop in Italy, don’t know how old but it was pretty, the guy wanted €1800. I let it go.I gave in and did a 'buy it now' on a very pretty alto sax. 1930s Orsi from Italy. £205 delivered.
I did bid on some scruffy old things to clean up and repair but they were going for far too much IMHO.
I've got the Saxophone Manual and lots of tools so if it needs major work I ought to be able to do it. At least it won't need a 4 foot long 3/4" drive breaker bar like my Hardley-Ableson does!
Purdy
Looks nice and clean from the pictures. Appears to be nickel plate. As long as you’re happy with the value that’s OK.The Orsi alto arrived from Italy half an hour ago.
One sticky key, right down at the end of the bell. Nothing some Harley-Davidson wheel bearing grease (which is a very pretty blue) and a 3/4" drive torque wrench set to 250 ftlbs won't cure.
I eagerly fitted the neck and the nice new Yamaha 4C mouthpiece with the Vandoren #2 reed.
Most of the other keys seem to be fine. Octaves blow OK my incompetence notwithstanding.
Makes a noise like a saxophone.
Looks really nice.
A win then!
