Miscellaneous I keep losing out on eBay saxophones because I am tight-fisted!

Well, yes, the point here being.... when one buys a $300 Tenor...what they get is a $300 Tenor.

For $350 one could have found a used, serviced Bundy I or II witha little effort and patience.....

But I do hope it serves you well, Toothless. IF one's Tenor budget is really $300, then one has no other realistic options other than very cheap budget Chinese instruments.
 
I gave in and did a 'buy it now' on a very pretty alto sax. 1930s Orsi from Italy. £205 delivered.
I did bid on some scruffy old things to clean up and repair but they were going for far too much IMHO.
I've got the Saxophone Manual and lots of tools so if it needs major work I ought to be able to do it. At least it won't need a 4 foot long 3/4" drive breaker bar like my Hardley-Ableson does!
 
@DaveT - What "name" are you after?
A name we've heard of which may be average?
Or something with a good name, good reputation?
Or any old branded horn never heard of before?
If you let me know, I'll see what I can spot for you on my "travels" and PM you.
😉
By 'name' I mean not the cheap Chinese saxes.
I wonder about a curved soprano and 'obscure' saxes. C Melody for example, and a bass clarinet.
My Selmer soprano is a Model 22 made in 1925. I bought it because it was better in every way than the 8 other modern sopranos I tried it against.
 

I gave in and did a 'buy it now' on a very pretty alto sax. 1930s Orsi from Italy. £205 delivered.
I did bid on some scruffy old things to clean up and repair but they were going for far too much IMHO.
I've got the Saxophone Manual and lots of tools so if it needs major work I ought to be able to do it. At least it won't need a 4 foot long 3/4" drive breaker bar like my Hardley-Ableson does!
OK, so basically you did exactly what I suggested folks NOT do. You purchased a project horn (a slightly anachronistic one at that, if in fact seller got it right and it is 1930's although I cannot remember seeing many a pre-war Orsi myself)...and now you are going to 'do it yourself'.

So...a set of new pads will run 40 quid...it is unlikely you have tools such as a leak light, proper torch, pad slicks, multiple thicknesses of sheet cork, felts, shellac, swedging pliers, key oil, etc...so you will have to pick up some of that stuff so lets add 35 quid or so there. Hopefully it doesn't have any significant dents or pulldown or impactions which can escape the eye of an inexperienced buyer.

So you will be in it around 280-300 quid ...and this will be the first sax you have every serviced so it is very likely the end result will not approach what a respectable -quality tech job (IOW..you may get t playing but you will likely be chasing problems repeatedly over time, as the 'first one' never is quite 'dialed in').....

while when all is said and done, the 300-ish could have bought you an already-playing, serviced-shape reputed brand Alto which likely has far slicker key response and intonation than an old Orsi does.

I don't mean to sound snarky or hyper-critical......and I DO hope you have fun with the repair...but...

...as far as the "I'm gonna get this one on the cheap" thing goes....you will have ended up investing the exact same amount as a good budget model horn already in good playing shape would have cost.

Which reinforces the general opinion that when you wanna buy a decent Alto in reliable playing shape, you need 300 quid.
 
Last edited:
I gave in and did a 'buy it now' on a very pretty alto sax. 1930s Orsi from Italy. £205 delivered.
I did bid on some scruffy old things to clean up and repair but they were going for far too much IMHO.
I've got the Saxophone Manual and lots of tools so if it needs major work I ought to be able to do it. At least it won't need a 4 foot long 3/4" drive breaker bar like my Hardley-Ableson does!
Everybody knows that you can’t get a decent sound out of a 1930s Orsi if you don’t retro fit a 4 foot long 3/4" drive breaker bar. I found a silver Orsi alto in a junk shop in Italy, don’t know how old but it was pretty, the guy wanted €1800. I let it go.
 
I had a 60s/70s Orsi alto stencil "Boston Beacon". Under £100 iirc... not a nice horn at all, but you never know, you may have a different model. I doubt it's 30's though?
Anyway, I thought you were after a curved sop? I see an Antigua at £275 and an Oddysey at £200, both "as new" per the sellers. Small ads, not eBay.
Would you like either link PMd?
 
Well, it really IS pretty!

As for the rest...
I'm a contrary soul, always have been.
My Harley Sportster has rear-set footrests - unheard of on a Hardley.
My Hardley Touring Barge has had the radio and speakers removed, lightweight parts fitted where possible. The exact opposite of what most people do.
I'd like to try a selection of really nice curved sopranos but that is somewhat difficult at the moment.
I might hate curved sops - never tried one.
I bought a 1925 Selmer Model 22 soprano because it was easier for me to play than any of the modern saxes I tried. Had it not been there I would have spent more time comparing the Yamaha YSS 475 and the JP Mauriat. Would probably have got the Mauriat.

Tools always come in useful for something else so that's not a problem.

AND saxes are cheap compared to nice motorbikes. You want the 2020 version of my 20 year old Touring Barge? £23,000 for the base version, £34,000 for the full-on Custom Vehicle Operations bike, makes an Eppelsheim look reasonable.
His soprillo sounds wonderful!
 
Let's see if I can manage a coupe of thumbnail pics.
Orsi_01.webp
Orsi_03.webp
 
The Orsi alto arrived from Italy half an hour ago.
One sticky key, right down at the end of the bell. Nothing some Harley-Davidson wheel bearing grease (which is a very pretty blue) and a 3/4" drive torque wrench set to 250 ftlbs won't cure.

I eagerly fitted the neck and the nice new Yamaha 4C mouthpiece with the Vandoren #2 reed.

Most of the other keys seem to be fine. Octaves blow OK my incompetence notwithstanding.
Makes a noise like a saxophone.
Looks really nice.
A win then!
 
The Orsi alto arrived from Italy half an hour ago.
One sticky key, right down at the end of the bell. Nothing some Harley-Davidson wheel bearing grease (which is a very pretty blue) and a 3/4" drive torque wrench set to 250 ftlbs won't cure.

I eagerly fitted the neck and the nice new Yamaha 4C mouthpiece with the Vandoren #2 reed.

Most of the other keys seem to be fine. Octaves blow OK my incompetence notwithstanding.
Makes a noise like a saxophone.
Looks really nice.
A win then!
Looks nice and clean from the pictures. Appears to be nickel plate. As long as you’re happy with the value that’s OK.
I never cared much for HD. Although I did put 18,000 miles on a ‘91 Skirtsturr.
 
That feeling that you have a chance because the current highest bid is reasonably low is an illusion. As others said, the real action happens at the last seconds when the final price often skyrockets by sniper bidders. eBay hasn't been a place to get deals for more than a decade by now.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,585
Members
8,133
Latest member
walthang
Back
Top Bottom