Reeds i fancy a change of reed!

Interesting thread Jez. thanks.

Im rapidly gaining interest in trying these rigottis. All you guys praising them. By coincidence a mate is trying to get me on them.

But im confused by all the options.

Is the one Im looking for the RIGOTTI GOLD JAZZ ?

strength.......... they seem to come in 3 versions of each strength. ie soft medium and hard

At close to £30 per box of ten, I dont want too many of the wrong strength.

normally im on vandoren v16 3's sometimes they are a little soft, and I have some 3.5s that i sand down a little.

So, any thoughts on what im looking for in rigottis? I m thinking 3 hard.

thanks
 
strength.......... they seem to come in 3 versions of each strength. ie soft medium and hard

At close to £30 per box of ten, I dont want too many of the wrong strength.

normally im on vandoren v16 3's sometimes they are a little soft, and I have some 3.5s that i sand down a little.

So, any thoughts on what im looking for in rigottis? I m thinking 3 hard.

I think the way it works is that they come in half-steps. You buy a box of 3's or a box of 3 1/2's and the reeds in the box are a mixture of Soft, Hard and Medium relative to that strength. This is the same as with any other reed manufacturer. The difference is that Rigotti marks them (in rather a silly way) instead of making you find out for yourself. It's not the same as 3S, 3M and 3H in D'Addario reeds.

They are also sold in packs of 3 reeds.
 
Interesting thread Jez. thanks.

Im rapidly gaining interest in trying these rigottis. All you guys praising them. By coincidence a mate is trying to get me on them.

But im confused by all the options.

Is the one Im looking for the RIGOTTI GOLD JAZZ ?

strength.......... they seem to come in 3 versions of each strength. ie soft medium and hard

At close to £30 per box of ten, I dont want too many of the wrong strength.

normally im on vandoren v16 3's sometimes they are a little soft, and I have some 3.5s that i sand down a little.

So, any thoughts on what im looking for in rigottis? I m thinking 3 hard.

thanks

Yes mate they are the jazz version, as regards strength I think you may be right? I ordered mine from Reeds Direct Cambridge and spoke to an online advisor who said a match for my java 2.5’s would be a 2.5medium but they would be a tad harder but only just and they are
 
I think the way it works is that they come in half-steps. You buy a box of 3's or a box of 3 1/2's and the reeds in the box are a mixture of Soft, Hard and Medium relative to that strength. This is the same as with any other reed manufacturer. The difference is that Rigotti marks them (in rather a silly way) instead of making you find out for yourself. It's not the same as 3S, 3M and 3H in D'Addario reeds.

They are also sold in packs of 3 reeds.

it doesn’t quite work like that, each strength comes in 3 subdivisions so where rico jazz selects would have a 2soft, 2medium and 2hard and then the next would be a 3 strength, Rigotti would have a 2soft, 2medium and a 2hard plus a 2.5 in soft, medium and hard and then a 3 strength, so twice as many sub divisions in strength for Rigotti, plus you can order a box of 10 in any of those strengths, not a mixture of strengths but all the same in one box
 
it doesn’t quite work like that, each strength comes in 3 subdivisions so where rico jazz selects would have a 2soft, 2medium and 2hard and then the next would be a 3 strength, Rigotti would have a 2soft, 2medium and a 2hard plus a 2.5 in soft, medium and hard and then a 3 strength, so twice as many sub divisions in strength for Rigotti, plus you can order a box of 10 in any of those strengths, not a mixture of strengths but all the same in one box

Ah, sorry, I didn’t realise that that the boxes of ten are different from the packs of three.
The 3-packs contain 1 each of soft/medium/hard.
 
It might not be the reeds that have gone off but your embouchure has grown/developed/changed.
A simmilar thought has also crossed my mind.
I have noticed that in most activities, as you make progress, you come to a certain point where things don't seem to work as well as before. It is temping to look for "a cure" to these problems in the tools you use or the external circumstances.
But often it is just a normal fase in your progression, you just have to keep going and after a few weeks/months your progression will have gotten over this dip.
Having said that, this doens't rule out the possibility that there is perhaps something wrong with the tools...... 🙂
 
A simmilar thought has also crossed my mind.
I have noticed that in most activities, as you make progress, you come to a certain point where things don't seem to work as well as before. It is temping to look for "a cure" to these problems in the tools you use or the external circumstances.
But often it is just a normal fase in your progression, you just have to keep going and after a few weeks/months your progression will have gotten over this dip.
Having said that, this doens't rule out the possibility that there is perhaps something wrong with the tools...... 🙂

Im talking about reeds that are inconsistent from day to day, not anything to do with any changes elsewhere though im starting to realise where my ballpark setup lies which is good.
 
Update after big band rehearsal, well after thinking the HR link 6* wasn't cutting it and trying my STM which is a size up being a 7 with same strength reeds the perception in the room to me playing in this setting was that i am better on the HR link, it might not be the right one, could be i need to go up one to a 7 with same reeds or try a size up on reeds on same HR link, its obvious my comfort zone is on a HR Link around a 6* -7 with a 2.5 or 3 reed, having never played in a big ensemble before its completely different! i have just tried an new vintage HR link in an 8 and its obviously not my size but preferred the tone to my link so one of those in a 7 tip may be good
 
Playing in a section is very different. The aim is for it to sound like one instrument imo. If you can pick out any one player there's something not quite right.


theres the added problem that you need to project for solo's so its a bit of a balance finding the right setup, unfortunately the ensemble im play in are a bit loud most of the time and dont listen
 
theres the added problem that you need to project for solo's so its a bit of a balance finding the right setup, unfortunately the ensemble im play in are a bit loud most of the time and dont listen
In that case, the last thing you want to do is try and blend in with people who don't sound very good. Hopefully they can learn to blend in with you, Jez.
 
In that case, the last thing you want to do is try and blend in with people who don't sound very good. Hopefully they can learn to blend in with you, Jez.

To be honest the levels of competence in the band varies , its a community band so they join to develop as players, each one at a different level and inate ability to learn at at their own speed, then there is the musical awareness aspect, my own playing has its short comings but i have a level of awareness and knowledge that is greater than my practical ability, part of the problem is having ones head stock in a chart trying to get the part right lol
 
This reed thing is getting obsessive! Just got a box of Vandoren ZZ 2.5’s, on first try after soaking them I have 3 players, not sure about the other 2 as yet, like the Java’s I had to use my Reedgeek to flatten the table of them all after first playing to get them to respond properly, they [BGCOLOR=transparent]were all convex except one which was concave, they are very similar to the Java’s but have a bit more meat to them, very even sound, they seem a little more consistent than the Java’s, will see how they on the big band rehearsal tomorrow, playing them on my Florida stm[/BGCOLOR]
 
I've been using Marca Jazz for the last 3 years, I've now got them on sop, bari and tenor, so in total have bought 4 boxes - 2 tenor, 1 each for the others. In that time I've had 1 single reed that didn't play straight out of the box - all the others play with metronomic reliability. They are up the more mellow end of the reed spectrum but if that suits you, you might want to give them try?
 
For some reason I edged my bets and also put in the case a HR Link 6 and some java 3 reeds, well I tried the Florida stm with the 2.5 ZZ Reed in the room that we were rehearsing and then tried the HR link with java 3, the result is that I feel I have more control on the HR with a smaller tip and harder reed !
 
I bought some Rigotti gold reeds to try out after reading all these endorsments. First testing this weekend was very rewarding, I got a clearly better sound than before (I used Hemke before). If the other 2 reeds work just as good I think I will switch to Rigotti
Used on tenor, with a Selmer Soloist mouthpiece.
 
Hemke are very consistent, but consistently dull imo. They seem to be ok every time. Middle of the road tone. Easy to get accurate intonation. I carry some with the alto for that rare moment when all else fails. They're also handy if nothing else is available, and come in a handy box of five.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,584
Members
8,133
Latest member
walthang
Back
Top Bottom