Accessories I didn't know I needed this. Do i?

It IS water. Not spit. There might be spit in the mouthpiece, but not the body of the horn. It's all condensation from the warm wet air in your lungs.

Regarding the pull through, mine dries my horn just fine. I used to have a pad-saver, but I think HW Products is out of business; they don't show the pad saver online.

I make my own swab out of chamois. I have to dry the chamois out overnight if I play longer than 1/2 hour, and I'm constantly pouring water out of the bell of my horn.

Most of the commercial swabs are not very absorbent. Which is why I use chamois...
We can called the "water" for water. IMO opinion it's important that the water comes out ot the body, neck and mouthpiece. I don't think a swab is enough to get a dry and clean body, neck and mouthpiece. I take the water out by soaking it up. A pad sawer is better because it reach out to the chimney as well. When it's dry I use to clean the body with a soft clean swab. Once a week I also use a swab which is dampen with clean (destil) water. I don't eat and drink (beer, liquoer wine, glögg ... ) stuff that contains lots of proteins before I'm playing. The water is building up the inside of the sax. I used to give old saxes a bath ...... .
 
I'm not saying a pad saver is bad. But I disagree about the swab, though it does depend on the material the swab is made from. Chamois swabs work great for me.

I recently tried to find a pad saver for my tenor, and found that HW Products does not have them in stock. I know the people behind HW Products, and I suspect that the company is really soon to be out of business because the people who created it have passed on.
 
My last baritone never got swabbed out for the 40 years I played it. My recent one gets the pigtail swabbed and sat on the stand to dry.

I'm having problems finding something that works on a one piece straight sop. The mouthpiece end is so small.
 
My last baritone never got swabbed out for the 40 years I played it. My recent one gets the pigtail swabbed and sat on the stand to dry.

I'm having problems finding something that works on a one piece straight sop. The mouthpiece end is so small.
Make your own.
If the mp end is too small to pull a piece of material through then have a swab with two strings; one pulls it as far as the mp end and the other pulls it back down.
 
My last baritone never got swabbed out for the 40 years I played it. My recent one gets the pigtail swabbed and sat on the stand to dry.

I'm having problems finding something that works on a one piece straight sop. The mouthpiece end is so small.
I use a lovely one on sop by BG
1000012643.webp
 
Technique matters.
I toss swab #1 in then work into the bow area with saver stick. Let it soak up everything in bow. Swab #2 I pull through at least twice. In goes the pad saver and let rest a few seconds. Open Eb and twist the saver until I see some bristles poking out of tonehole. Open & close the key a few times to blot any moisture off. Repeat / continue same technique all the way to top. Bell keys & Lo C# too.
Remove the saver and let sax air dry.
I’ve made a swab for neck. It goes in after neck is removed and mouthpiece is off. It stays in until body is done then removed.
Task takes five minutes.
Mouthpiece is rinsed in cold water and dried.

All cleaning tools are washed twice monthly at minimum. I have three full sets. Never a rush to clean them. Always have clean tools on hand.
 
My last baritone never got swabbed out for the 40 years I played it. My recent one gets the pigtail swabbed and sat on the stand to dry.

I'm having problems finding something that works on a one piece straight sop. The mouthpiece end is so small.
There's an expensive silk swab by Key Leaves (+ p&p from US) that can slide through the narrowest tube. Silk is more billowy than other materials, so in theory it'll catch moisture at the wide end of the tube

Possible solutions are...
1. Order a Key Leaves swab
2. Make your own with silk handkerchief and nylon cord
3. Years ago @nigeld mentioned that bassoon players have a two pull cords on their swab, each at opposite corners. I have made this design and you can drag a too-fat swab partially through a narrow bore and pull it back again, so any cheap absorbent material will do
4. Make your silk handkerchief swab with two pull cords, just in case
 
I bought one (I think it was your praise of it on the other site that put me over the top, John!) Unfortunately, it did not last. I got 2 or 3 uses out of it, then it got caught on the octave pip sticking into the bore of the body, and it got shredded. So I stick with my chamois swabs.
Oh man, sorry about that! I've been using the Hodge swabs for years and haven't had that problem, but I guess nothing is foolproof. What I like about the silk swab is that it will pass through the horn, the neck, and the mpc. It gets the mpc completely dry and also does a pretty good job drying the neck & horn. There may be a bit of dampness left behind in the horn, but I leave the horn out on its stand or in the open case for a few hours to allow it, and especially the pads, to dry thoroughly.

I can get around 10 years out of one swab before the silk does start to degrade. So, then I just buy a new one.
 
I'm not saying a pad saver is bad. But I disagree about the swab, though it does depend on the material the swab is made from. Chamois swabs work great for me.

I recently tried to find a pad saver for my tenor, and found that HW Products does not have them in stock. I know the people behind HW Products, and I suspect that the company is really soon to be out of business because the people who created it have passed on.
Still available in Sweden. Not as H.W. Pad-Saver (LaVoz), it's called D'Addario Woodwind (Rico Padgards) over here. No mouthpice saver, neck saver and bow bell saver any more.

 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,196
Members
8,127
Latest member
PJ2116
Back
Top Bottom