Saxophones Howdy, look what I found!

Gardysax

New Member
Messages
2
Location
Scotland
Hi all. New to the forum. I'm a Yank now living in Scotland, whom decided to pick up a new/old hobby. Played all through middle and high school, but then I took a 27 year break.

Anyway, on the whim I decided I wanted to play again a couple weeks back and found a local lady selling her dad's pride and joy. It's a Yamaha YAS 25, and she let me have it for £300 since it was going to a good home. I thought that was a fair price; and it's very similar to the one I had all those years ago!

The old man must have looked after it quite well, as there are no dings, minimum surface scratching, and the only blemish is a itty bitty bit of lacquer flaked from the bell edge. I'm just curious when do you think this horn was manufactured? I'm guessing it's about 35 years old. I've emailed Yamaha, but no response yet. Also, other than taking it to a tech for a check over, is there anything else I should be doing to maximize this beauty?

So far, after a 27 year break I can still read sheet music and remember most of the notes. Now, my mouth muscles, breathing and intonation is another story... Opted for a basic 5c mouthpiece for the time being, but welcomed to any suggestions.

Well, thanks for listening. Hope to talk to y'all more in the coming months and years. And please see the photos, I'm well chuffed with my new toy, and even though it is only a student horn, I really wanted to show it off! 😁

Gardysax
(Only let's me attach 2 photos)
 

Attachments

  • PXL_20250610_192935446.webp
    PXL_20250610_192935446.webp
    128.2 KB · : 108
  • PXL_20250610_193026493.webp
    PXL_20250610_193026493.webp
    48.3 KB · : 70
@Gardysax welcome to the Café. If Yamaha replies at all they will most likely state the date shipped and / or the store / distributor. Not the actual date made. It’s my understanding the YAS 25 was the equivalent to YAS 23. The 25 being outside of the US market. My SN# list from another person is ongoing research. Your SN shows as approximately 1987-1989.
You’ve got a nice one ! As a friendly suggestion have it properly oiled. It’s been sitting a long time. COA is the term for this service. Clean-Oil-Adjust. The horn will be completely disassembled, cleaned, oiled, reassembled, reviewed for leaks and regulated / tuned.
 
Welcome @Gardysax

Nice looking YAS 25, a great find. I'm a 6 month novice so not going to give advise about mouthpieces etc but I find a 5C perfectly OK, easy to blow, well made and known. As you haven't played for a while it might be a safe bet for now.

I also have a YAS 25 and a YTS 25. My alto's no. is 087xxx which I believe makes it between 1991-2001. I did see a list of no.s and dates somewhere but can't find it.

Enjoy your return to playing!

Edited to add this is the list I found Saxophone | YamahaCollector's Ya
 
@Gardysax welcome to the Café. If Yamaha replies at all they will most likely state the date shipped and / or the store / distributor. Not the actual date made. It’s my understanding the YAS 25 was the equivalent to YAS 23. The 25 being outside of the US market. My SN# list from another person is ongoing research. Your SN shows as approximately 1987-1989.
You’ve got a nice one ! As a friendly suggestion have it properly oiled. It’s been sitting a long time. COA is the term for this service. Clean-Oil-Adjust. The horn will be completely disassembled, cleaned, oiled, reassembled, reviewed for leaks and regulated / tuned.
In Europe the YAS25 was a later model than the YAS23, with slight improvements, including the addition of a high F#, a key I've always found indispensible, not so much for the F# itself as for altissimo G.

I agree with the suggestion of a COA light service, it looks in great shape so after this minor bit of attention should be an excellent sax.
 
It was the only pad sticking. I lightly oiled the pins and posts, and did the ole paper bill trick. It's not sticking now, but I suspect it needs replaced when I do the COA.
It's one of the pads most prone to sticking, which I think is down to its location. If you're reasonable adept at dismantling and have a decent quality precision screwdriver, unhook the spring and remove the key. It's then easy to give the pad a good clean with lighter fluid, and wipe over the tone hole. Unless the pad is worn or torn, that should cure any sticking without the need for replacement.
 
For constantly sticky normally closed key try putting a piece of currency under it after you swab out the sax and just leave it there. Don't forget it when you next try to play, you will think that your sax is broken. For an MP, I like my OLTE 6 and they are not expensive. I tried a Yamaha 4c when I first started learning and hated it. I am also a fan of Legere reeds.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,060
Messages
578,350
Members
8,128
Latest member
Roger Atlas
Back
Top Bottom