Mouthpieces How can I band a Brilhart to prevent it from cracking?

Depends on your metal working skills. Got access to (and the skills to use) a lathe? If you do you can make one to fit. You'd need to be pretty precise with measurements or you'll need too much epoxy or similar to hold it in place.
 
You know what will do most to prevent cracks? Ream the bore to a cylindrical shape instead of the conical shape it was left as-molded in.

Then if you want, turn the ID of a heavy wall brass tube to be a light press fit over the MP shank, apply epoxy and press together, then turn down the OD to a shape you like.
 
Waking a sleepy thread to put my tuppence in. Mojo's ring sizer idea is great but an actual ring looks much nicer.

I just banded a Great Neck Ebolin alto piece using a 2mm tungsten carbide wedding band with a gloss black finish. I measured the end of the shank with calipers and got 21.84mm which matches closely to a US 12.5 or UK Z1/2.
I turned the shank on a lathe to remove a couple tenths of a millimeter for a press-fit, scuffed the inside of the ring with 120gr sandpaper and epoxied it on.

BrillyBand1.webp
BrillyBand2.webp
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,059
Messages
578,332
Members
8,127
Latest member
PJ2116
Back
Top Bottom