Tech/maintenance Homemade tips for stripping lacquer?

All very interesting. I have stripped saxes using nitromors and it is not a pretty job, even with a double layer of safety gloves I sort of ruined my skin (it all grew back, but looked a bit cracked for weeks!).
Which is why you MUST dilute it!
Another chemical to experiment with is Cillit bang:
Ah, good old Barry Scott! "BANG and the lacquer is gone"
 
Fraser, I read your post, however I avoided diluting Nitromors as I thought water would stop its effectiveness. I assumed that washing off the nitromors would stop it from attacking the lacquer/varnish... or am I reading it wrong?
 
MMM By diluting the Nitromors, yes you are going to reduce it's effectiveness but at the same time you are going to be able to work it around the instrument much more easily, and by using gloves and a non metalic scourer this will prove to be very efective, remember it's only a thin layer of lacuer and not multipal layers of paint thats being removed.

You need to use cold water though as hot water just evaporates off leaving you with an unworkable mess! but hot water is best for rincing off afterwards.

As with some other alloys, you can get a reaction using the stuff neat that cawses dark staining, this is all avoided by diluting the mix.
 
Hi Yanni,
I won a Beacon Tenor Sax on ebay last November complete with a well worn mouthpiece for £62. :w00t:

The sax has lacquer wear and pitting.

I intend to strip the sax down and the body will be bead blasted, ( By Me )
As the key work and rods are chrome plate they are in very good condition.

I will be blasting the neck crook in the near future to see what the results are
if you are interested will keep you or anyone else posted.

View attachment 603

Pic of the Beacon Tenor Sax

Tony (teebones) :mrcool


Update Pictures Taken Before and After Beadblasting :w00t:

DSC00115.jpg
DSC00119.jpg
DSC00126.jpg


As can be seen the lacquer is pitted on the neck,rest of the sax not much better.:shocked:

Will be trying out,wax ,staining effects,etc, to get the required look.>:)

Time to beadblast = 3 mins :welldone

Tony (teebones)
 
Last edited by a moderator:
Tony, I have to say that I like the finish you've achieved. Is it perfectly smooth? I wonder what it would look like if you preserved it under a coat of lacquer?
 
Interesting process ...

Oooo! that's looking a lot better mate ... Nice work ...

What sort of kit do you use to do the Bead-blasting, is it hired, owned or done at work or something? [Nosey bugger ain't I] ;}

Will it be able to deal with all the more intricate parts of your sax? or just the bigger parts? :confused:

I am just a nosey neighbour - from King's Lynn ... *Sunray Waves*
 
Looks great doesn't it I'm sure with some matt lacquer to protect it the sax will look fab,personally I may have been inclined to leave the neck joint as it was for reasons of fit ,keep up the good work I can't wait to see how the whole sax finishes...john
 
Tony, I have to say that I like the finish you've achieved. Is it perfectly smooth? I wonder what it would look like if you preserved it under a coat of lacquer?

Hi Taz,
The finish is much better than the picture show,the surface is "smooth" if you wipe across the surface with cotton wool, no fibres would remain.
The above gives a discription in laymans terms. 🙂

I may to try spraying with lacquer,at some stage.

But at this stage will use a stainless steel cleaner which is silicone based,this stops finger marks and gives a slighly darker look,and leave the brass natural.


I hope one day Taz to be able to play the saxophone nearly as good as you, only don't think time is on my side :w00t:

Tony (teebones) :mrcool
 
Oooo! that's looking a lot better mate ... Nice work ...

What sort of kit do you use to do the Bead-blasting, is it hired, owned or done at work or something? [Nosey bugger ain't I] ;}

Will it be able to deal with all the more intricate parts of your sax? or just the bigger parts? :confused:

I am just a nosey neighbour - from King's Lynn ... *Sunray Waves*

Hi there Sunray,
You got a long way to go before you be a "Norfolk Dumpling" 🙂))
The kit used is at the engineering company I spent the last 50 years "working" :w00t: turning,milling,boring,welding the list go's on and on everything from F1 racing cars to turkey plant parts.
As to the intricate parts no problems. 🙂

Tony (teebones) :mrcool
 
Looks great doesn't it I'm sure with some matt lacquer to protect it the sax will look fab,personally I may have been inclined to leave the neck joint as it was for reasons of fit ,keep up the good work I can't wait to see how the whole sax finishes...john


Hi John,
As I said above the finish is excellent, "knew it would" >:) as to the neck joint fit, belive me the amount removed is very very small "microns" so no problems there.

Estimated time to complete "next year this time" all going well.>:)

Tony (teebones) :mrcool
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,529
Members
8,132
Latest member
LouisJR
Back
Top Bottom