Tech/maintenance G# key cover?

djarossens

Member
Messages
42
Location
Switzerland
Hello, I'm trying overhaul a 1931 Kohlert sporano and the G# key is a sort of oval (like a running track) and was covered with some sort of black (black?) inlay I guess to match the rollers on the adjacent keys. Any idea what this would have been and where I can get something to use in its place please?
Thanks
 
Solution
Hello, thanks to all for the input and help, I finally ordered a wafer of Mother of Pearl from Mother of Pearl Flat Blanks for Guitar & Luthier Supplies, Mother of Pearl Blank Suppliers. in the UK as I was struggling to find large enough pieces on the sax sites I normally frequent. Happy to say the cutting, gluing and polishing went well. Now I need to figure out the thread size for the roller rods as these need to be replaced, (the rollers were seized and I have damaged the rods in extracting them) I'm guessing a 2-56 thread but I have ordered a gauge that I hope will help me figure it out a bit better.
IMG_4818.webp
Any idea what this would have been and where I can get something to use in its place please?
It depends on how handy you are. As @Dibbs said it could be ebonite, in which case find an old thowaway mouthpiece and make it from that. But if you aren't too fussed any kind of black plastic sheet (maybe from a hobby/craft shop?).

Or

 
Vote:
Upvote 0
I have MoP on the G# key on my "MODELL 1927" soprano (#215XXX). I don't know when they changed? I recommend to have a jeweler, or person that can work on metal, to make a new G# finger touch. Brass or silver.

The G# finger touch on my overhaul project that I'm not. going to overhaul. Too much money ..... .
IMG_4845.JPG
 
Last edited:
Vote:
Upvote 1
Another option might be to use acrylic nail powder. You have a wide choice of color…. pretty easy to get something that looks like MOP. I have used this to add baffle material to mouthpieces. It requires use of a solvent, which is noxious but dissipates quickly. I would do the key pearl replacement in several layers, as thicker applications take much longer to cure.

I recently bought some replacement “pearls” for a soprano - they were made of stone, red jasper in my case. Could be a nice way to add some extra bling. Not expensive, I think $15 or so for a full set.
 
Vote:
Upvote 0
Milliput has been mentioned before in the forum. I've used it for mouthpieces to repair or replace inserts. In other DIY jobs too. I keep my stock in a fridge...
Does it last better in the fridge? I find I only need the stuff every couple of years or so and often find that it's gone all crumbly and unusable kept in a drawer.
 
Vote:
Upvote 0
Does it last better in the fridge? I find I only need the stuff every couple of years or so and often find that it's gone all crumbly and unusable kept in a drawer.
Yes it does. I can't remember when I bought mine, but I used it quite recently and it was still fine. Maybe not as supple as initially but it worked.

I have a fridge in the basement, so it doesn't have to be mixed with our food. My wife would probably refuse that I kept things like this indefinitely there...

The basement is my den. It's guarded by some hypothetical spiders that keep my wife away from here most of the time. >:)
 
Vote:
Upvote 0
Hello, I'm trying overhaul a 1931 Kohlert sporano and the G# key is a sort of oval (like a running track) and was covered with some sort of black (black?) inlay I guess to match the rollers on the adjacent keys. Any idea what this would have been and where I can get something to use in its place please?
Thanks
image.jpg

Key and last remaining piece of the insert, what is this?
image.jpg

Didn't know about that, looks ideal for the job. Any thoughts @djarossens ?
Didn't know about that, looks ideal for the job. Any thoughts @djarossens ?
 
Vote:
Upvote 0
Thank you all for your input and ideas, on closer inspection is does look like bakelite held in with shellac. I will try and fabricate a cover from an old mouthpiece to look like the rollers. All the held and advice much appreciated.
 
Vote:
Upvote 0
Rather than destroying a mouthpiece, why don't you buy a piece of black plastic sheet and cut it from that? It'll be a great deal easier. I don't know what industrial suppliers you have there, but this would be where I'd go.

 
Vote:
Upvote 0
The way I see it, Milliput is ideal for this. To avoid having it too strongly bond to the key up, I would use an underlying film so I could remove the insert once formed into place and glue it with shellac or contact cement... Something removable.

I have replaced all the keys on my YSS soprano by green abalone. I can't find the pictures now, but this is another horn where I used green abalone keys.

IMG_20141129_164811142.webp


But it may not be to everybody's taste...
 
Vote:
Upvote 0

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,524
Members
8,132
Latest member
LouisJR
Back
Top Bottom