Tone or Sound Fingerings up to altissimo G

Selmer10G

Member
Messages
130
Location
East Sussex, UK
So... I have a [tenor] student who's about grade 4-5 standard, who's really keen to be able to play up to altissimo G. He had a few overtones pop out by accident in lessons, went "hey that's cool" so there followed the discussion on overtones etc, and he's now started doing racher top-tones style bugle call exercises on his own accord. I wouldn't start him on altissimo except he really wants to.
so... we all have our preferred fingerings for these notes, but which to use for these runs of notes for someone at his level? His grasp of voicing is good- he can pop out the altissimo G with a few different fingerings, but knowing how to use it and run up a scale to get there is different.
1702288548162.webp

1702288930581.webp

Cheers
 
Sometimes, smart, eager, capable students want to really get into something and you have to let them. Especially if they show promise with it.

I'm sure @Pete Thomas must have a page on it in Taming The Saxophone - rather than trying to find a less-than-clunky/drawn-out way of denoting fingerings on here.

As you probably know, there are some significant differences on several notes between alto and tenor in particular. The other main stipulation is the use of front E and F in order to aid transition to the altissimo, rather than the palm keys.
In my experience, lower harmonics can be harder to voice than higher ones - a little bit of "threading the needle" sort of thing, whereas the top C, C#, D are basically amplified squeaks and you either get them or you don't - unlike G, which could be an undertone fail, or an overblown note (D?). I think the hardest to get (and not fall off) are B and G#.

Over to Pete..
 
The way I would finger those passages is to use the front-F fingerings for high E, F and F#, then on tenor use front-F + side Bb for high G.

On alto try that same fingering, but it probably won’t work. Some altos can use front-F + RH 1 (the F key) + side Bb, which is a little clumsy since the RH index finger presses two keys at once. But some altos won’t play this, and for those I use LH 1 and 3 + RH 1 and 3, + maybe the Eb key.

This kind of passage really points out the futility of the high F# key that is present on most horns nowadays. One of my tenors and one of my altos has it, and I never use it. It’s really easier to use the alternate front-F key fingerings for E, F and F# - they are easy to play smoothly from palm keys, and lead naturally to G in most cases.

G# is another matter entirely….
 
This kind of passage really points out the futility of the high F# key that is present on most horns nowadays. One of my tenors and one of my altos has it, and I never use it. It’s really easier to use the alternate front-F key fingerings for E, F and F# - they are easy to play smoothly from palm keys, and lead naturally to G in most cases.
If his tenor is anything like the ones I have then the front fingering for F# is way too flat.
I've been playing horns with a top F# key for over 40 years so I'm quite used to it. It gets used for F# and G. Both nicely in tune.
 
Unlike alto, you add RH 1 to the front F# to sharpen a flat note.
Indeed, but that's pressing 2 keys instead of the one top F# key.
I use that method for G3 on alto actually. Aux F + side Bb +RH1
🙂
<edit>
E3 alternative (auxF LH23) has to be played with the G# added to be in tune also. I'll stick with palm keys.
 
Last edited:
Indeed, but that's pressing 2 keys instead of the one top F# key.
I use that method for G3 on alto actually. Aux F + side Bb +RH1
🙂
<edit>
E3 alternative (auxF LH23) has to be played with the G# added to be in tune also. I'll stick with palm keys.
Sorry Nick - crossed wires. You're talking about the F# key itself? Presumed Front F plus side Bb - fine on alto, flat on tenor.
I've never liked the top F# key, unless I was in a pit orch and needed to play it pp - then it's wonderful. Never use it, like Skeller.
 
A bit of a resurrection since this came up in something I've been working on .
ditt bit.webp


It's really for alto but I'm doing it on baritone. It's allegro (112 - but I can't manage that yet 🙂 ).
The easiest way to finger the repeated figure at the end of the first line is by using the front F for all 3 notes. It sounds dreadful though and the G isn't anywhere near as solid as my usual G fingering ( x--/--- + high F# + side Bb). This fingering is much closer in tone to the palm key notes so I've been working on that. There's rather more fast finger movement than I like but it's getting there.
 
Nick:

On that pattern, on either alto or bari I'd use for G: front F, RH side Bb, and possibly RH index finger (don't use it on my bari, do use it on my alto); for F# Front F, LH middle finger, RH side Bb, RH 1 and 2; for E the standard front E fingering.

I don't think there would be excessive shifting. I try to avoid going on and off of the front F key.

I don't have a single instrument with a high F# key so I have no fingerings based on it.

It seems like woodshedding the pattern is called for. Probably a lot given the complex fingerings. Think "third octave flute"/.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,071
Messages
578,533
Members
8,132
Latest member
LouisJR
Back
Top Bottom