Introduction father of a learner and an accomplished repairer of stuff

1923martin

Member
Messages
17
Location
UK Harrow
my boy is learning on a evette buffet crampon and as a challenge i thought i might buy a doer upper, so i got another buffet crampon coming that i will do up then allow my son to leave at school, school band is on thursday and lesson is on friday! its just too close.
i am an Electrician by trade but also a fixer and a cub scout leader and a lego restorer, so i like a challenge.
 
Welcome.

Do you know if the Buffet Crampon Evette (assuming it IS an Evette too) coming was made by the same manufacturer ad the one you have already, i.e. identical?

If I recall correctly they were made by KHS/Jupiter or Keilwerth. Not to be confused with Evette Schaeffer horns previously made by Buffet themselves (mostly).
 
The name "Evette Schaeffer" has been used in various contexts for over 100 years. Originally the name applied to a top line horn made by Buffet. Later, Buffet named the top line horns "Buffet" and had student instruments named "Evette" (no Schaeffer) made by one of the Italian or eastern European makers. In recent years all kinds of old names have been applied willy-nilly to essentially interchangeable horns from Chinese factories that'll happily engrave any name you want if you buy a minimum order. That doesn't necessarily mean there's anything wrong with them, just that the "Buffet Evette Schaeffer Conn-Selmer Martin Super 20" you buy today has nothing whatsoever to do with the "Evette" student horn of the 1960s and 70s nor with the "Evette Schaeffer" horn of 1920.
 
Do you know how to detect and repair leaks? Do you understand how all the mechanisms interact, i.e., do you know that pressing low C# must not open G#, but F must close G# and bis keys fully without keeping F open at all, and that there are two octave vents operated by the same key? Seems like you might be biting off more than you can chew since you don't play, no matter how handy you are with other "stuff".

I also agree with @turf3 that buying a second mediocre horn is not really necessary. Get a better or worse horn depending on your ultimate goals.

By the way, I had one of those Evette student horns back in the 70s. It was ok for a student model, but nothing I would ever buy again, not even for experimentation purposes.
 
Last edited:
Welcome to the Cafe. Taking a saxophone apart, cleaning and oiling it, and then putting it back together isn’t that difficult as long as you make a record of where all the bits go, but regulating a horn, so that all the little pieces of cork are the right thickness and the keys interact just right is quite tricky. It’s the way that the keys affect each other that is difficult - they don’t all move independently.

But good luck, and go for it!
 
Welcome.
Do you know if the Buffet Crampon Evette (assuming it IS an Evette too) coming was made by the same manufacturer ad the one you have already, i.e. identical?

If I recall correctly they were made by KHS/Jupiter or Keilwerth. Not to be confused with Evette Schaeffer horns previously made by Buffet themselves (mostly).
HI, both are made in ROC, they look the same as the one we have from the flea bay pics, until it arrives i can only hope
 
Do you know how to detect and repair leaks? Do you understand how all the mechanisms interact, i.e., do you know that pressing low C# must not open G#, but F must close G# and bis keys fully without keeping F open at all, and that there are two octave vents operated by the same key? Seems like you might be biting off more than you can chew since you don't play, no matter how handy you are with other "stuff".

I also agree with @turf3 that buying a second mediocre horn is not really necessary. Get a better or worse horn depending on your ultimate goals.

By the way, I had one of those Evette student horns back in the 70s. It was ok for a student model, but nothing I would ever buy again, not even for experimentation purposes.
i have worked out how to detect for leaks with my improvised maglite and some paracord(taped so it didnt scratch the sax on the way down, i understand its complex and i am not claiming expertise overnight, and i will probably fail, but i will surely fail if i dont try.
 
Thank you all for your varied welcomes, i am not trying to dumb down the expertise required to take an average horn to something amazing, i had an idea to amuse myself with a complex mechanical marvel, i am not fooling myself into thinking i will repair a few horns and suddenly be an expert, but when a spring comes off a few hours before or during a practice i might be able to fix or to have enough understanding to know something is beyond laymans repair. i look forward to being told off as well as advised, and will have some hot shellac ready for my first rookie error!
 
i have worked out how to detect for leaks with my improvised maglite and some paracord(taped so it didnt scratch the sax on the way down, i understand its complex and i am not claiming expertise overnight, and i will probably fail, but i will surely fail if i dont try.
regarding the horn and the 2nd horn, i know it is a beginners horn, i was astounded my sons school didnt have a sax in the music department, my long term plan would be that once he is past playing the Evette i will donate it or them to his school so they can allow others to benefit from it, and having mirrored horn at home and in school made sense to my little brain rather than the dangers involved in taking the home horn out for walkies.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,525
Members
8,132
Latest member
LouisJR
Back
Top Bottom