Mouthpieces Drake Son of Slant

I've never used any of the Rovners with metal plates in. I use a lot of legere reeds and have never had them slip on the basic fabric / rubber type ligature
 
I know you're probably desperate for a reason to buy another new mouthpiece ... but with synthetic reeds I just cut up bits of those little white sticky address labels and put them on the back of the reed. Makes the reed a bit thicker and helps the ligature to grip.
Lol...i really dont want another piece..lucky enough to have the lakshmi..at the other end the kanee florida is great but just needs a lig..I really prefer the 2 screw cheap types..good tip ill have a go..
 
I lubricate my Rovners (I have 4 in different sizes) -I just clean the thread with kitchen towel and lubricate the thread with a bit of cork grease. The gold plated ones need far less maintenance than the plain steel one I have for my alto
 
I have adjusted a metal baritone lig which was slightly too wide for the mouthpiece by gluing some strips of thin cork (.5 or 1mm, depending on how much of a gap needs to be taken up) to the top inside of the ligature. This has a dual purpose: it makes the lig diameter smaller and avoids any scratches to the top of the mouthpiece.

I guess the same could be achieved by adding layers of masking tape, but the cork is just cleaner and compresses to the right thickness.
 
Last edited:
I have adjusted a metal baritone lig which was slightly too wide for the mouthpiece by gluing some strips of thin cork (.5 or 1mm, depending on how much of a gap needs to be taken up) to the top inside of the ligature. This has a dual purpose: it makes the lig diameter smaller and avoids any scratches to the top of the mouthpiece.

I guess the same could be achieved by adding layers of masking tape, but the cork is just cleaner and compresses to the right thickness.
Nice tip..thanks
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,574
Members
8,133
Latest member
walthang
Back
Top Bottom