Saxophones Don't be shy show us your patina

100 years of honest wear !

alt2.webp

alt3.webp
 
I’ve never understood why one side is reasonably worn looking and the other is really shiny. I suppose I must be polishing it with my pants.
I noticed it prevalent on your tenor sax clothes guard and back side next to it.

The sax usually hangs from the neck strap resting against the pants right hip / thigh due to its longer length. The polished back side is from the rubbing motion against clothing during play and rest. It keeps down the oxidation, hence why has a polished look.

It shows that your sax is a regular user. However if it were stored in a case over a number of years, would probably oxidise losing its shiny appearance.

I've noticed this even on my lacquered saxes. By use the lacquer finish is worn off, then becomes the lighter shiny brass in the same area as yours.
 
My best Martin. A Handcraft model from 1938. A little bit better than my Magna which I renovated with help from my friend. The Handcraft renovation was done by a real pro in USA in 1994. Need some care but the inside of the sax is shiny.


20250718_184606.webp
20250718_184646 (1).webp
 
no just worn away
This is the state in which I bought it and Paul Carrington brought it back to lifr

Those bare regions are not in places easily accessible during normal use. It looks like someone has used brass polish on the horn some time in its life and worn away the silver plate. Regardless, on behalf of voiceless ol’ horns, thanks to you and Paul for giving this instrument a second chance at life.
 
no just worn away
This is the state in which I bought it and Paul Carrington brought it back to lifrView attachment 29554View attachment 29555

Look at the sides of the F and E keycups! Worn away, the shellac is showing through the edge! I did this to my Mark VI alto, I put it down to a mix of the many toxic chemicals in my system (caffeine, nicotine and alcohol, to say nothing of numerous others which shall remain nameless), and my proclivity to over-indulgence. And a resultant tendency to sweat….

But maybe this generation of horns were more susceptible to being worn away? I’ve seen other VIs with this kind of wear, but my SBA hasn’t worn like that. And neither has my tenor, which is an earlier VI. Though this one is on the earlier side, so maybe not. I owned the tenor at the same time as the VI alto, (and I still own it) so I would expect the wear pattern to be similar. Maybe I just had a worse hand position on alto…

Not really clear, but that horn had a hard life. Good on Mr. Carrington for fixing those holes!
 
I'd love to give a professional sounding chemistry answer but it's this stuff

View attachment 29533

in a 1% dilution with distilled water (1ml of gun blue for every 100ml of water). Color develops over 5-10 minutes and it must be agitated every 20-30 seconds to keep it developing evenly.
So it is immersed in the solution ? Or applied in some other manner ? You'd need two bottles that size, then ?
 
So it is immersed in the solution ? Or applied in some other manner ? You'd need two bottles that size, then ?
I did full immersion because I wanted the finish to be as even as possible to start with. For the alto I used a 40qt plastic storage container which required 9 gallons of water and four 3oz bottles of bluing solution to completely cover the horn. For the tenor I re-used the same solution but transferred it to a giant zip loc vacuum storage bag and kept it sloshing around as the color developed.

20210612_170105.webp
 
Last edited:

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,061
Messages
578,375
Members
8,128
Latest member
Roger Atlas
Back
Top Bottom