Tech/maintenance Does this screw regulate how easily the G# keycup opens?

Messages
700
Location
USA
This morning it seemed like my G# keycup was having real trouble opening, more than usual from just a sticky pad.

Would tightening this screw make the keycup open more easily?
Gsharp screw detail
 
Yes, I really should, just a question of budget. I've had it to a tech twice in the year and a half I've owned it, but more for a couple of leaks and minor adjustments. The second tech in December said overall it was in good condition, though I imagine things can drift on older horns.
 
Which spring controls the G# keycup? Is it the top one on the hinge rod @SaxBoss was talking about?
The one on the same piece of metal opens the G to G# keycup. The spring on the G# key closes it, except when you play a bell note. Than the F# to G keycup closes the G to G# keycup.
 
Which spring controls the G# keycup? Is it the top one on the hinge rod @SaxBoss was talking about?
Post a few pictures of both sides of G# area. A 1950’s JK Tone King can have a few different issues causing your problems. I need to see the system to help. Dry or dirty is probably the issue. Just don’t increase the spring tension to overcome the problem. That can cause other problems. Like not closing.
 
I suspect it's going to be an extra sticky pad or the G# cup opening spring might be a bit weak (arrowed in my picture). Or, have you dislodged the spring?? You could try a small amouth of lubrication on the pivot at each end of the barrel. As others have said, clean the tonehole and the pad with some lighter fluid (or even warm water) on a piece of blotting paper. The G# cup is actually sprung to be naturally open and is held down by the G# key mechanism which has a more powerful opposing spring. Don't try to make any adjustments to any screws. Adjustment of the spring tension is possible but if you don't know what you're doing leave well alone. It is the one closed key that gets flooded with condensation more than most others.

G# Key Spring.webp
 
Last edited:
Yes, I really should, just a question of budget. I've had it to a tech twice in the year and a half I've owned it, but more for a couple of leaks and minor adjustments. The second tech in December said overall it was in good condition, though I imagine things can drift on older horns.
Pads can get sticky for a number of reasons. One of them is drinking sweet carbonated beverages during playing.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,062
Messages
578,395
Members
8,129
Latest member
Bartman
Back
Top Bottom