Tech/maintenance Do I dare attempt a tear down and cleaning of a silver plated sax?

My attempt may have to wait until December.
I've been asked to perform during the dinner portion of my Community Choir/Bands Christmas Dinner Concert.
We, choir and band members, serve up to 190 people a steak dinner before moving to the auditorium for the actual concert.
The head director hasn't decided if I'll be performing on clarinet or saxophone yet so holding off on the teardown is probably wise.
 
Any bare brass bits, use this:


Won't last forever, and brass needs to be smooth prior to application for maximum original look. You'll also get a slight *join* line when adjacent to original plating.
I had an idea which spurred me on to clean my Selmer London Pennsylvania (Orsi stencil) tenor which I bought a while ago for £35, in bits, some missing (but don't worry... I have a plan)...

Anyhow, I thought I'd use the Walsh plating solution to clean it as I vaguely recall reading somewhere it's good for this. The matt finish is kinda grubby...

Screenshot 2022-12-04 at 14.49.22.png


I tried the plating solution on cloth in a limited area and it cleans the dirt off whilst not abrading the matt surface. Clean cloth to wipe off the residue...

Screenshot 2022-12-04 at 14.49.01.png

20221203_160901.jpg


Have to do the whole thing now. But first, I'm using a slightly older £50 L/H bell keys Orsi Karl Meyer tenor (speckled condition, needing a total overhaul anyhow) as a donor for parts to rebuild the Penn and check for function. Most of the hinge rods were missing from the silver Penn, and the side C arm, and Eb guard. The last two from the KM are lacquered brass so I'll need to turn them silver... guess how?
 
Last edited:
No, I'll just use the plating solution.

Walsh make the best as far as I can tell. I used it extensively on a 20's Buffet where the silver plate had worn through in some areas. It would leave a feint line where bordering original plate, but otherwise was excellent so long as you prepped correctly.

It won't last as long as proper plating, but very few do silver plating now.
 
I would be interested in seeing the process and how it turned out. That product is not available stateside. Although there is Nushine. I don’t know anyone who has had any experience with this product though.
 
I would be interested in seeing the process and how it turned out. That product is not available stateside. Although there is Nushine. I don’t know anyone who has had any experience with this product though.
There are several "rub-on" silver plating solutions on the market. Before I got into electroplating I tried a few different brands to "touch up" the worn areas on silver plated saxophones. The photos below show the results using a brand called Silver Smith. The shortcoming of this type of plating is that once a very thin layer of silver is deposited on the base metal, further application and rubbing does not add to the thickness. In other words it is ineffective plating silver onto existing silver. It does however clean and polish existing silver so it looks new.

1670340962529.webp
1670340983804.webp
 
There are several "rub-on" silver plating solutions on the market. Before I got into electroplating I tried a few different brands to "touch up" the worn areas on silver plated saxophones. The photos below show the results using a brand called Silver Smith. The shortcoming of this type of plating is that once a very thin layer of silver is deposited on the base metal, further application and rubbing does not add to the thickness. In other words it is ineffective plating silver onto existing silver. It does however clean and polish existing silver so it looks new.

View attachment 22023View attachment 22024
Well given the option of doing nothing versus doing something that’s quite nice. Is this Silver Smith product the one from Caswell ?
 
Well given the option of doing nothing versus doing something that’s quite nice. Is this Silver Smith product the one from Caswell ?
Yes it is. There are others on the market that are less expensive. I wasn't happy with the brass color still showing through so I silver brush plated it when I had the proper equipment.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,611
Members
8,133
Latest member
walthang
Back
Top Bottom