Saxophones De-Mythifying the Purple Logo

That is a great piece of work, impressive and when you have a horn you like you will ensure you look after her. Might be expensive but..............you love her! Well done and a great thread to post.

Thank you for your words.

But see, please: U$ 200.00 with the G1 neck (U$ 155.00, sealed, new and genuine Yamaha) and shipping costs (U$ 24.00) included.
Do you think so expensive U$ 20.00 (£ 11) for all new and genuine yamaha parts and without need any job from a technician? I not even went out of my house!
And I continue with the originals pieces in my hands (say, in my drawer) that allows me reattach them again in place if I decide for sell the instrument in the future.
Honestly, I have not found it SO expensive.
Well, if I was lucky enough to have our friend Griff136 closer to manufacture the part for me and only charge me £ 5 for everything, then I agree with you. But where I live there is no such help, unfortunately. So, that was the best way I found.

But my greatest wish at to post all that was not because of financial values . I know I maybe could not have done a great deal financially. The objective was to show that parts of the new YTS-62 ones fits on the old ones. That's all.

PS : I had been watching the prices of used G1 neck in e-bay and never found for less than $ 250.00. So, when I found one for $ 155.00 I did think was an interesting oportunity.
 
Thank you for your words.

But see, please: U$ 200.00 with the G1 neck (U$ 155.00, sealed, new and genuine Yamaha) and shipping costs (U$ 24.00) included.
Do you think so expensive U$ 20.00 (£ 11) for all new and genuine yamaha parts and without need any job from a technician? I not even went out of my house!
And I continue with the originals pieces in my hands (say, in my drawer) that allows me reattach them again in place if I decide for sell the instrument in the future.
Honestly, I have not found it SO expensive.
Well, if I was lucky enough to have our friend Griff136 closer to manufacture the part for me and only charge me £ 5 for everything, then I agree with you. But where I live there is no such help, unfortunately. So, that was the best way I found.

But my greatest wish at to post all that was not because of financial values . I know I maybe could not have done a great deal financially. The objective was to show that parts of the new YTS-62 ones fits on the old ones. That's all.

PS : I had been watching the prices of used G1 neck in e-bay and never found for less than $ 250.00. So, when I found one for $ 155.00 I did think was an interesting oportunity.

Hi Savio

Welcome to the forum

I play around with saxophones myself and as soon as I saw the diagrams that came with it I thought "this is interesting"and enjoyed the read and I can see what you were trying to achieve
You say you don't have a Griff 136 where you are but now you are on the forum you do,and the help of quite a few other great and willing techs, it's part of the wonder that is the SAXOPHONE FORUM so enjoy ......John
 
Now all this talk of G1 necks has got me thinking should I give one a try and are they readily available to buy and will I need to do the altering of the octave mechanism to fit it and how many other alternative necks are there available for the 62 mine is dated 2000 and not a PRUPLE LOGO......John
 
Hi Savio

Welcome to the forum

I play around with saxophones myself and as soon as I saw the diagrams that came with it I thought "this is interesting"and enjoyed the read and I can see what you were trying to achieve
You say you don't have a Griff 136 where you are but now you are on the forum you do,and the help of quite a few other great and willing techs, it's part of the wonder that is the SAXOPHONE FORUM so enjoy ......John

Thank you very much for your kind words John.
 
Now all this talk of G1 necks has got me thinking should I give one a try and are they readily available to buy and will I need to do the altering of the octave mechanism to fit it and how many other alternative necks are there available for the 62 mine is dated 2000 and not a PRUPLE LOGO......John

John,

If the your 62 is a MK-II, it came with G1 neck, right? Theoretically, it no needs any altering. But take care: some 62 without purple logo on bell are MK-I and these ones need altering. The MK-II came after 2001/2002 or something like that. The other members can explain better. Sorry for my poor english...

Savio
 
John,

If the your 62 is a MK-II, it came with G1 neck, right? Theoretically, it no needs any altering. But take care: some 62 without purple logo on bell are MK-I and these ones need altering. The MK-II came after 2001/2002 or something like that. The other members can explain better. Sorry for my poor english...

Savio

No it's a MK 1 and I would imagine that if it had the G1 neck it would be stamped even if it was standard I will be looking into the availability of these I suppose they're available from most good saxophone suppliers ......John
 
I think there's been a misunderstanding of the cost of the upgrade, and certainly on my part even though I read it a good few times I thought you had spent $200 upgrading the mechanism when it was only $20 and most of the cost was the G1 neck,I like the way you've gone about it, I suppose the use of the additional peg makes it a lot easier to swop between necks without having to replace the parts each time .....John
 
so, what's the verdict here? What difference will it make to my 62 mk1 alto if I upgrade and put a G1/3 neck on? Or... would it be better to save the pennies and wait to upgrade to 82Z ? - Oh no, I foresee a trip to woodwind exchange and ... well.. we all know how that goes!!
 
It`s not an upgrade soundwise it`s an "Alternative" like a Yani or a RAW etc would be (all in different respects) .. same for the 82Z . if you like one of the Yam Pro horns , be it 61, 62, 855, 875 or 82Z there`s no guarantee you`ll like the sound as much from any of the others, they all have their own sound .

The other side is that you may actually prefer the more mellow later 62s and Customs to the lively Mk1 and even livelier 61 , though in an Alto I prefer the bright older Yam sound, the MkIII 62 I had came to life with a Purple Logo neck fitted . In Tenor I like the G1 neck's fuller rounder sound
 
Last edited:
You`d think so, but do they differ soundwise so a "Custom" isn`t necessarily an automatic upgrade to a 6 series or the 875 an upgrade to an 82Z for sound . Yanis are the same, the 992 isn`t necessarily better than a 901 , in fact someone here bought a 901 over a 992 recently due to them preferring the sound of the "lesser" horn.......

It`s all down to the sound we want and like at the end of the day, the differences between Yamaha Pro models isn`t just down to fancier keywork and bling bumping up the price , they do sound different (not necessarily better) so I`d suggest our Mk1 62 owner to actually play an 82Z before going that route, he`d not be the first to stick with the 62 model and not be the last..
 
I knew I would hook you with my reply Ads!!! Having never tried a Yani (I think) I am not at liberty to comment . Agree with your comments though on build quality I would be looking a long time to see something better built than my 875.

Happy with my YTS 62 as well......!
 
so, what's the verdict here? What difference will it make to my 62 mk1 alto if I upgrade and put a G1/3 neck on? Or... would it be better to save the pennies and wait to upgrade to 82Z ? - Oh no, I foresee a trip to woodwind exchange and ... well.. we all know how that goes!!

Peter Ponzol custom neck...plastic tube extension on octave mechanism...simple...

Greg S.
 
I think there's been a misunderstanding of the cost of the upgrade, and certainly on my part even though I read it a good few times I thought you had spent $200 upgrading the mechanism when it was only $20 and most of the cost was the G1 neck,I like the way you've gone about it, I suppose the use of the additional peg makes it a lot easier to swop between necks without having to replace the parts each time .....John

Yes, John. The cost of G1 neck was US$ 155.00 and this value is included in total of U$200.00.
 
so, what's the verdict here? What difference will it make to my 62 mk1 alto if I upgrade and put a G1/3 neck on? Or... would it be better to save the pennies and wait to upgrade to 82Z ? - Oh no, I foresee a trip to woodwind exchange and ... well.. we all know how that goes!!

he he he... Come to Brazil, my friend! Come to the third world! he he
 
Last edited:

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,673
Members
8,134
Latest member
banjo
Back
Top Bottom