Accessories Castors for my tenor case?

You could busk while traveling.
Tip jar on back.
Easy to fit on an autopilot/GPS.
Tenor beats a Klaxon for safery.

IMG_5278.webp


Might make enough $$$
and get an off-road kit.

IMG_5280.webp
 
On a serious note,
you could have inflatable ballon tires fitted, that take up the hard bounce, and transmit little to the rest of the, we call it a hand truck, be just like walking while carrying.
But not with your current cart, maybe if it's made into a two wheeler..
Might consider having something else made/modified, if you're in to the Tenor,
for the long haul. πŸ™„
IMG_5291.webp
 
Yes mine has the integral rucksack straps. But the length of the tenor bag is long and I am, unfortunately short! It's also too heavy to carry on my back .

Maybe I will just take my alto and soprano outside and just have the tenor for home use?
What are the factors that guide your decision of which horn to play?

Much as I cannot imagine choosing to play any other saxophone, perhaps the tenor is not for you. Do you really need one in your life?

I am 6’4”, but I only played bari when I needed to. Once I was past that, I sold it. Same for sop and alto. Their days are behind me.
 
First off, you'll want to see if making the straps as short as possible (the standard sliding buckle on the straps) gets the case up high enough. I know about this, as my double bass bag has straps and it took me a while to get them adjusted short enough so it didn't bang me in the backs of my knees as I walk.

If you can't get them short enough to raise the case up enough not to hit you in the backs of the legs, then the upper attachment is too high, and you'll need to detach the straps' upper ends, and reattach lower down. I expect a couple pop rivets and fender washers will do it, but I haven't seen your particular case and its strap attachment details.

Or, try different cases with backpack straps - they'll all hang a bit differently.
 
...

Much as I cannot imagine choosing to play any other saxophone, perhaps the tenor is not for you. Do you really need one in your life?
...
Meh, it's just that the case is heavy and she wants not to have to schlep it by hand. Multiple possible solutions have been proposed; it's time to just try some of them.
 
Meh, it's just that the case is heavy and she wants not to have to schlep it by hand. Multiple possible solutions have been proposed; it's time to just try some of them.
Meh, it was a question for the OP. Why schlep anything if you really don’t need to? Much I love the sound of a Traynor twin or a Fender Super Reverb, they are too heavy for me to transport. Leave them in the studio. Yes, I understand such complex engineering principles such as the lever and the wheel, but why fix something that doesn’t need a solution?
 
My point was that something being troublesome to carry around seems like a poor reason to give it up, unless it's really a case of physical disability. I'm still playing baritone as my primary saxophone voice, even though it gets to be more of a pain to handle it every year. That's why I've invested in a variety of wheeled contrivances. I also play double bass, and believe me, no saxophone is as much of a pain to transport as that.

Especially when there are multiple ways to carry a tenor saxophone around that will be easier to deal with than the large rectangular very heavy OE Yamaha case. I'd at least try some alternatives before deciding to drop the tenor sax because of difficulty in carrying it.
 
She seems to have the Etui case which is lighter than the standard hard one but is still fairly big. As it looks very like the BAM Trekker I would guess that it’s made by them and more or less the same. I can see that if you are 5’2” or less it might get in the way. The straps are fixed about 1/5th of the way down from the top and if they were fixed much lower I think it would start to throw the balance, however I don’t think it’s really an option with this case.

Another option is to get a lighter shoulder type case which would have less bulk and weight and be altogether more manageable for the OP. The horn would still weigh but you can probably get a couple of kilos of the weight of the case.
 
I just took a look at the BAM website. They make a real keen super-close-fitted case the "Cabine" - and those weigh around 8 lbs. That's more than the horn it contains! So case weight is a REAL THING. Pick the lightest case you can find. It may well be one of these BAM models.

Since (if memory serves) you're playing a modern Yamaha 62 (did I get it right?) the shape of that should be essentially identical to a Selmer and should (but I don't guarantee) fit any modern case.

If your priority is light weight, you'll have to forgo carrying some things in the case. Just mouthpiece, reeds, and a strap.
 
I looked at the SKB website and the 450 contoured tenor case lists weight at 7.02 lb (this case has a nice slot for the neck and a mouthpiece) and the 150 contoured tenor case lists weight at 6.68 lb (this one, you've got to store the stuff in the bell).

I'd bet that big honkin' Yamaha case tips the scales at 12 lbs or more.
 
She seems to have the Etui case which is lighter than the standard hard one but is still fairly big. As it looks very like the BAM Trekker I would guess that it’s made by them and more or less the same. I can see that if you are 5’2” or less it might get in the way.
I'm 5ft 3in. When I tried it with the straps it was very cumbersome.

I think the tenor is going to have to stay at home!
 
Yamaha don’t seem to publish case weights among the full description stuff. BAM do a Classic shaped case that weighs 2.4 kg. I doubt that you’ll find anything offering decent protection for less weight than that. They seem to be widely available for between Β£200 and Β£245.
I'm 5ft 3in. When I tried it with the straps it was very cumbersome
Yes, I can see how it would be uncomfortable.
 
I'm 5ft 3in. When I tried it with the straps it was very cumbersome.

I think the tenor is going to have to stay at home!
Me, I'd use a folding two wheeler and a couple bungee cords, and put some foam rubber between the case and the dolly, or I'd search out a lightweight case. Or both.
 
With apologies to all, this episode with the various suggestions reminds me of:

funny_sales_marketing_cartoon_tree_swing_new_product.png

From Marketing Funnies: Tree Swing – What the Customer Wanted

A bit of risk assessment ... Being a motorcyclist, I am sure some do not like my selection of tyres, (e.g., too hard, too soft, too easily worn out, etc.) Being in a vulnerable position, I do that which increases my likelihood of survival, to include the right protective clothing and boots.

At 5'-3", the OP is petite. (She is taller than my wife. - 4'-10", perspective. However her best friend at our wedding 40 years ago, also our pianist was tallest, described herself as 5'-12".) πŸ˜‰ Thus, it would be understandable to want to off-load some of the sax's carrying bulk to a set of wheels. She is not going to sprint rolling the case in front or behind her. And, the sax being her own she is going to treat it gently.

(Do you think the band's loading crew is going to place that tenor sax in its case on a bed of pillows whilst escorting it outside on a wheeled pallet to load it on the van?)

The portable hand truck I use is lightweight, convenient, but has helped me also move large, heavy boxes, even small tables. Its larger wheels handle paved surfaces well, especially concrete expansion gaps and irregularities.

Recently I moved my Vito tenor sax to a contour case. It is now a joy to carry versus its bulky original rectangular case. There are also quality but lighter weight cloth covered hard foam contour cases. Perhaps an option would be such and a decent satchel to carry the books (and stand)?

A photo of my contour case is here:
 
A bit of risk assessment ... Being a motorcyclist, I am sure some do not like my selection of tyres, (e.g., too hard, too soft, too easily worn out, etc.) Being in a vulnerable position, I do that which increases my likelihood of survival, to include the right protective clothing and boots.
Don't be deluded. I have now witnessed two incidents of cars not slowing at a stop light and plowing into the car stopped in front of them - one of them involved me. I actually saw the driver behind me looking down at the phone in his lap as he failed to notice the red light. He was doing about 40-50 mph when he hit my car. If I had been on my motorcycle instead of in a car, I would have been killed regardless of my riding suit and helmet. The only good news is that protective gear helps contain the various parts.
 
I recently saw a video where a young woman fell off a motorcycle due to "death wobble". She was wearing full protective gear including the slide plates that slip into pockets on the sides of the pants.

She had no brain injury, no road rash, no internal injuries, but the impact of her knee on the ground caused sufficient damage to require multiple months of physical therapy and possibly some surgery.

So,, all the right gear, a generally excellent outcome, and STILL a wrecked knee (that I'm willing to bet will NEVER be quite right again). I believe my decision to give up the motorcycle 40 years ago was the right one.
 
But as to schlepping a tenor sax, I'd use a folding two wheeler, some foam rubber, and a couple bungee cords, with a modicum of care and planning.
 
I have one of these Protec Zip Micro cases at, 2.6kg. I haven't found anything lighter, and it comes with backpack straps.


...or in a lovely green

The Bam Cabine is listed as 3.4 kg on their website.

Things like the sax stand and music stand can go in a separate wheeled suitcase and be bumped around to their hearts' conent.
 
The man has good taste in saxophone choice. That’s an early 1920’s C Melody tenor. A Martin or Couturier. Although I have no clue what’s working the neck octave key ?
Nice cart but looks in need of a cup holder ? I wonder if a wagon could be towed behind this ?
One like @cappers suggested on post #8.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,215
Members
8,127
Latest member
PJ2116
Back
Top Bottom