Ligatures Can a mouthpiece really be that finicky..

Maybe it's just too wide for you, or there's something about the facing curve that's throwing you. Have your pro mate give it a go to get a second opinion. If he says it's ok then at least you might feel that you can sell it on.
 
Last edited:
or there's something about the facing curve that's throwing you.
It's actually quite logical to think that a facing curve could cause reed pickiness. e.g. that the length of the facing curve dictates the length of the reed that is actually vibrating - hence the position of the heart of the reed relative to the tip must be optimal for the length of the curve.

However I'm sure somebody, a reed company or mouthpiece manufacturer, would have published something either properly scientific or (more likely) pseudo scientific.

But there is no formula for the ideal facing curve. I think mouthpiece experts know certain parameters, and have an innate knowledge based more on experience than having a load of data written down. @Phil can surely correct me on that but my discussions with the good Dr Pillinger have concluded that once you get beyond the obvious technical considerations (of the rails being symmetrical etc) it is very much an "art" that is learned over time by doing it.

I have a huge respect for people like Phil and Ed who have learned this art. But another thing to consider is what what if this ace mouthpiece refacer uses only one specific type of reed, are they optimising the mouthpiece so it really does only work best on that reed, or is there such a thing as a mouthpiece that is great on any reed.

I remember Ron Coelho telling me I should use Rico Select on his mouthpieces. And when I tried a Jody Jazz and was struggling to get a sound tone I liked, Jody told me my reed was too soft. Huh.
 
Why don't you ask Ed Pillinger to check it out, it will probably be cheaper than sending it to Saksharma, because if you send it out of the country you will probably have to pay customs fee once it comes back to the UK
Really thats rotten...thouvht it may be insulting tbf...and hes been rather nice..
 
Really thats rotten...thouvht it may be insulting tbf...
How can that be rotten, its your mouthpiece, if the previous owner has damaged the piece and you can't send it back to the maker then you have a right to send it where ever you want, at least you will know if there is damage to the piece.

Is it rotten if you buy a stock Meyer and then have it refaced?
 
.pro mate plats his 8 link with 2 pasticover..
I don't know what that means???
because if you send it out of the country you will probably have to pay customs fee once it comes back to the UK
This is true. getting it sent back to Uk will likeliest 20% VAT on the value, plus import duty plus handling fee.

I'd not do that.

Why not just sell it on?
 
How can that be rotten, its your mouthpiece, if the previous owner has damaged the piece and you can't send it back to the maker then you have a right to send it where ever you want, at least you will know if there is damage to the piece.

Is it rotten if you buy a stock Meyer and then have it refaced?
No i know but...it comes alive but only with a three reed...wont play any 2.5s..and plays a red 2..weird...
 
I would if i knew its not faulty...re customs surely the piece has no value as its mine..
That's not how it works - expecting fairness in these things is only going to disappoint. A few years ago I used to work for a research organisation, and used to send very large datasets to the US. They were sent on encrypted hard drives, which were the property of the organisation I worked for. They would get impounded by customs every time, who wanted to charge us for importing our own devices. It was such a PITA that it ended up forming a part of the business case to set up a SFTP service for the US clients to access without sneding anything over the pond.
 
No i know but...it comes alive but only with a three reed...wont play any 2.5s..and plays a red 2..weird...
If it "comes alive" with a #3, then play it with a #3.

As to the matter of having a "clean conscience" if you choose to sell it, offer a trial/satisfaction warranty and if the buyer doesn't like it, it comes back to you. No harm, no foul.
 
If it "comes alive" with a #3, then play it with a #3.

As to the matter of having a "clean conscience" if you choose to sell it, offer a trial/satisfaction warranty and if the buyer doesn't like it, it comes back to you. No harm, no foul.
Just to much for me.....anyone use a bigger reed wantbto test it..lol
 
Last edited:
I think you've mentioned 3 reeds that work for you, in fact one of them "comes alive". I'd spend some more time with it, take a week or so and see what happens. When I got the RPC that I went on to use for about 10 years I hated it at first, couldn't make it play the way I wanted, reed picky as I said, and too bright, then I gave it some time and the rest is history. It was still reed picky, or strength picky, but it played like a darling when I had come to an accommodation with it. I think it was, is, pretty wide in the way of many or Ron's pieces but the size info had worn off.
 
Ok just a quicky..on a Florida link is there a ridge between the rails and sidewalls..is it a scooped out piece..

Are you looking for an excuse to call this a defective piece?

Anyhow...

 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,674
Members
8,134
Latest member
banjo
Back
Top Bottom