Mouthpieces Buffet Crampon tenor mouthpiece

PigSquealer

Connoisseur of applesauce
Messages
5,914
Location
Los Angeles🇺🇸
Level
Awful
Recently aquired with a Martin Typewriter tenor. I am lacking in my mouthpiece knowledge.
A little help identifying the year of make/model and grade would be most appreciated.
AB08275B-D571-4065-9222-12DBED4603BA.jpeg
B67C0EB5-5341-4B4D-9331-2FF25081A473.jpeg
A7E76A76-CB65-4F92-AD74-53DF74D003BA.jpeg
FC55C9A7-5371-4B4E-A22F-B22DF29E619D.jpeg
FF8AAC31-A1C2-4C61-97B7-578F98141F58.webp
 
Last edited:
Looking up the bore does it have a horseshoe-shaped throat ?

If so it is similar to my very favourite tenor mouthpiece (out of maybe 50) and I think was approximately contemporary with and equivalent to the old Selmer Soloist mouthpieces.

Have a look at this old thread on SOTW. They seem to be called the Master Bore model and were supplied with Buffet Crampon Super Dynaction (and possibly later) saxophones.

Also have a look at this blog on Riffault mouthpieces - bear in mind that they have had various external shapes over the years.

Rhys
 
Looking up the bore does it have a horseshoe-shaped throat ?

If so it is similar to my very favourite tenor mouthpiece (out of maybe 50) and I think was approximately contemporary with and equivalent to the old Selmer Soloist mouthpieces.

Have a look at this old thread on SOTW. They seem to be called the Master Bore model and were supplied with Buffet Crampon Super Dynaction (and possibly later) saxophones.

Also have a look at this blog on Riffault mouthpieces - bear in mind that they have had various external shapes over the years.

Rhys
Thanks for the information. I tried searching SOTW with no luck. I’m familiar with that Riffault article. Need to re-read again. It’s been awhile.

Horseshoe shape ?
CA00E831-806E-4974-84B3-03CCC343E533.webp
1F50A8D3-C8CE-4BEF-90FB-D45FA0079A5F.webp
353C720E-F3A8-41D3-90A7-5EC34FD870BE.webp
 
That's the one.

Very good quality rubber and they can be wonderful pieces. Mine was refaced by Morgan Fry before I got it and it's magical. I've got another as backup which is good too and also got similar B&C pieces for soprano, alto and baritone.

What are your plans with this one ?

Rhys
 
Thanks for taking the time to reply. For now I’ll just give it a gentle cleaning and test it. I’m feeling really lucky this will work on one of my ten tenors.
Also I need a good laugh. I haven’t looked up the value yet.
The MPC & Typewriter cost me $175 total. Full asking price including a case.
1712140783050.webp

1712141120455.webp
 
Don't expect too much if you want to sell these B&C mouthpieces. There are a lot around, mainly in small tip openings, and they haven't been discovered and spiralled in value like the old Selmer Soloists.

At a guess a piece like this might sell for around $100 with no flaws.

So really, it's a player rather than an investment.

At least until people start waking up to their great qualities.

Rhys
 
I think small chamber mouthpieces (smaller than the bore) and Martin saxes are good combos. I have some original Martin mouthpieces and the chamber is often "Horse shoe" or "V shaped".
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,521
Members
8,132
Latest member
LouisJR
Back
Top Bottom