Saxophone beginners bubbling condensate

allansto

Member
Messages
445
Location
Frankston Victoria Australia
bebopsop had a similar problem to me but seems to have solved his

My problem with spit/condensation seems to that it sits in the ledge between the mouth piece and the top end of the neck.
My cork does not appear to be too big. the spit/condensate seems to pool at the neck/mp joint and create a gurgling noise after I have been playing for 10 -15 mins.
I cant seen to shake it loose so I need to continually take the mp off and dry it out.
When I do this, quite a few drops of spit/condensation fall out.
Upon refit its fine again for another 10 mins.
P.S. Im playing a yam allegro tenor:confused::confused:.
 
Im at a loss to explain whats goin on,
Usually I get it on the midle to upper range but,
Today I played for nearly 2 hrs and not one gurgle
I used a different reed to yesterday, but I dont think the gurglings coming from there,
Too many variables though, cos today I played standing up.
There are alot of factors here so I`m going to have to experiment and eliminate
for a while to sort it out. :confused:
 
The cork might be big "enough" but still there might be some imperfections on it to allows some moisture to seep through...e.g. the joint of the cork might be a bit loose.
Another cause might be the reed...some aren't completely flat and won't seal completely.
 
I would try wrapping some sticky tape tightly around the end of the cork to improve the seal. Do also make sure that you rotate your reeds so that they have some time to properly recover, and make sure that they are stored on a flat surface where the moisture can evaporate.
 
Last edited by a moderator:
I bought some PTFE tape and applied it to my tenor crook - not impressed at all so have reinstated sellotape as my main addition. I found the PTFE so thin and weedy and I would have had to wrap it about 20x or 30x to get anywhere. Never experienced my mouthpieces ever picking up glue from said tape on either my soprano or tenor crooks, so will remain skeptical. I can appreciate that it is the sort of thing to wrap around slightly loose fitting screws etc. but seemed thin enough to be rather pointless, and rather unlikely to last.

So, I will be sticking with my original recommendation - just get decent tape and apply with some precision.
In which case I would latterly withdraw my thanks to KevvyG, even though I respect his views generally.
 
Last edited by a moderator:
A word on the cork. These often compress down. If you carefully move/hold it over the steam from a boilling kettle it'll expand to it's original size in seconds. Just rotate it to get it evenly done all round. And watch the laquer on the neck. Best hold the crook in an oven glove, it shouldn't get hot, but if you overdo it....
 
A word on the cork. These often compress down. If you carefully move/hold it over the steam from a boilling kettle it'll expand to it's original size in seconds. Just rotate it to get it evenly done all round. And watch the laquer on the neck. Best hold the crook in an oven glove, it shouldn't get hot, but if you overdo it....

sounds like a very useful tip...just one concern; how long does the cork treated in this way retain its shape?
 
Re: bubbling condensate

A word on the cork. These often compress down. If you carefully move/hold it over the steam from a boilling kettle it'll expand to it's original size in seconds. Just rotate it to get it evenly done all round. And watch the laquer on the neck. Best hold the crook in an oven glove, it shouldn't get hot, but if you overdo it....

Hey Kev that was an awsome idea
Steaming is definately the answer
I put my sax neck (cork) above the boiling kettle and quickly turned it over and over .
Lo and behold before my eyes in about 15 seconds the cork expanded back to its original size ( no more shrinkage or leakage.) You the man!!!!:welldone:welldone:welldone
I thought the cork looked a little squashed, but now I know it was.
Now I remember burning the corks on our clarinets 40 years ago, harsh I know.
Steamings the go. thanks Heaps.
Allansto
​
 
When I did it the cork nearly fell off and expanded in circumference by about 15%. If it were not for my trusty sellotape I would have to replace the cork. So, be warned...................................................................:shocked::w00t:;}
 
When I did it the cork nearly fell off and expanded in circumference by about 15%. If it were not for my trusty sellotape I would have to replace the cork. So, be warned...................................................................:shocked::w00t:;}

An update, I'd qualify this with - if the cork is properly stuck on you won't have the problem.

Just had the problem. On a neck cork I'd stuck on and the glue hadn't stuck properly... Net result was a new cork this afternoon. But it won't stop me steaming again if I need to. I'm just going to make darned sure that any more corks I do use proper contact adhesive or shellac...
 

Similar threads... or are they? Maybe not but they could be worth reading anyway πŸ˜€

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,662
Members
8,134
Latest member
banjo
Back
Top Bottom