Accessories Bari sax stand for playing

[jbtsax]

I'm looking for suggestions from bari players on which stands to support the sax while playing in a seated position work the best, OR which neckstraps/harnesses are easiest when supporting the weight of the sax that way.

 

[aldevis]

This expensive object has been a standard tool in big bands for a good while.
I've even seen charts with indication "bari on jiffy" (bari chair doubling on alto)

Jiffy Baritone Sax Stand - Sax.co.uk - The Worlds Leading Saxophone Specialist

 

[aldevis]

This seems interesting too, @Pete Thomas knows the maker, if I am not wrong.
SAXRAX Seating Sax Stick for Baritone - Sax.co.uk - The Worlds Leading Saxophone Specialist

 

[Pete Thomas]

This seems interesting too, @Pete Thomas knows the maker, if I am not wrong.
SAXRAX Seating Sax Stick for Baritone - Sax.co.uk - The Worlds Leading Saxophone Specialist

You are not wrong, I know John who makes Saxrax stuff. I was an endorser originally and was proud to see pics of me in his catalogue. Saxrax good.

 

[rhysonsax]

I have the Saxrax bari stand (not the Stick) which is supposed to be OK for playing from when seated, but I haven't found a really comfortable position. It is a great stand though and John of SaxRax is very helpful.

Rhys

 

[nigeld]

I use a Kölbl harness (size XL). It's for bassoon, but it works fine for standing or seated bari sax. Much more comfortable than than a neck strap, and I prefer it to a BG harness.

The Adams stand is a cheaper alternative to the Jiffy stand.
Adams - Playing Baritone Sax Stand

I had a look at a seated Saxrax stand, and I think it would be good if you have a modern A bari, but it doesn't work if you have a Bb bari - the height is wrong.

Also, the fixed stands, such as the Jiffy, are designed for modern instruments. The bell on my vintage Buescher was too wide to fit.

 

[MandyH]

I have had my FreeNeck harness for nearly 4 years. I play my Bari both sitting and standing and I play for up to 4 hours at a time without any problems.

 

[Nick Wyver]

Also, the fixed stands, such as the Jiffy, are designed for modern instruments. The bell on my vintage Buescher was too wide to fit.

They must have changed then. I have one attached to my '37 Conn (but it's probably as old as).

 

[Colin the Bear]

I must be a bit unusual. I've found a sling that copes with sop, alto, tenor and bari. Very handy when you're switching. I used to be wearing four slings

Sax Saxophone High Level Shoulder Strap Harness Leather Cushion Padded

 

[GJ77]

I love my Jazzlab Saxholder for my Bari. When I had a Conn 12m many years ago, I had a jiffy and it worked very well but I prefer not to play with the horn on a stand if possible.

 

[nigeld]

They must have changed then. I have one attached to my '37 Conn (but it's probably as old as).

The Adams stand wouldn't fit my 1949 Buescher Aristocrat bari when I tried it last year - the bell was far too big for the fitting strap - it wasn't even close. They didn't have a Jiffy stand in the shop, so I didn't try - I just assumed from the pictures that it would be the same. Maybe the Jiffy stands have more adjustment, or maybe it's the famous Buescher parabolic bore.

 

[kevgermany]

I tried the Cebulla bari strap with the wide adjuster, not bad but not good enough. Jazzlabs sax holder for me, with the longer of the two supplied cords fitted. However you must adjust it properly(as per instructions), and seated it still sits a little squiff, but gets the weight off your neck.

 

[jbtsax]

You are not wrong, I know John who makes Saxrax stuff. I was an endorser originally and was proud to see pics of me in his catalogue. Saxrax good.

Do you know what relationship the maker of Saxrax has with Paul Coats in the U.S.?

 

[Alc.]

I have three baris and use the Neotech harness. Funny that the Noblet and Buescher have the same adjustment (18") from hook to top of crook, but Bundy measures 17" from top to hook-loop. So I have one harness for the two horns and a seperate on for the Bundy. I don't like to adjust when I change horns.

I use Hercules stands, one for each horn. I have a stand for repairs which I have on a bench. I drilled a hole in one the frames so the horn adjustment allows the horn as near the bench as possible. I drilled a hole in another frame so the horn rests comfortably a bit higher and is best for me to play while seated. The other Hercules I left original as it is easier to lift the horn (still seated) while I swivel about to face the music-stand. Also two stands are double and also accomadate a tenor or alto.

I don't play the bari much while standing (me, I mean) because the 20 pound bari has become more like a 50 pound (lb) weight. My favorite position is seated with the horn resting on my hip. Sounds a little strange, but with the bari resting on my hip I feel the tone more, and the reverb I feel I play a bit differently, like I'm listening closer as I play. I suspect old age has something to do with this. Never mind.

 

[jbtsax]

Thanks for all the advice and suggestions. I have ordered the Saxrax sitting stick and the Vandoren saxophone harness.

I am also posting this sign in my back car window! 🙂

 

[nigeld]

I would like to hear your opinion of the Vandoren harness. I have wondered about getting one.

 

[kevgermany]

I am also posting this sign in my back car window! 🙂

Car! He said car! Not auto!

Now to work on the grammar.

Say after me "car's back window"

 

[jbtsax]

"car's back window" There are you satisfied. 😡

Just you wait, I'll get even . . .

 

[jbtsax]

I would like to hear your opinion of the Vandoren harness. I have wondered about getting one.

It is amazing. I give it my highest recommendation. It is a bit pricey compared to other harnesses, but it is worth every penny. I'll give a review of the Saxrax seating stick after I've had a chance to try it out.

 

[Guenne]

I'll give a review of the Saxrax seating stick after I've had a chance to try it out.

I ordered mine today from Thomann.

Cheers, Guenne