Accessories Bari neck straps

If I may revive this thread, I'm looking for help to find a sling/neck strap long enough to play my baritone. For more than 10 years I've used a Yamaha wide strap with a proper plastic-coated metal hook on it, but - shock horror!!! _ I've lost it! It needs to be quite long, as my neck is large, and even with my old strap at full extension I was just about falling off the end of the bari. The convivial picture shows the sling quite well, but was taken about 2 -3 (lockdown) stones ago - the neck is even bigger now! I don't think Yamaha make these any more, and I don't want harnesses, or things with plastic clips, just a long sling with a proper hook. Can anyone help (apart from the obvious "go on a diet")?
me and colin at Blaydon.webp
 
If I may revive this thread, I'm looking for help to find a sling/neck strap long enough to play my baritone. For more than 10 years I've used a Yamaha wide strap with a proper plastic-coated metal hook on it, but - shock horror!!! _ I've lost it! It needs to be quite long, as my neck is large, and even with my old strap at full extension I was just about falling off the end of the bari. The convivial picture shows the sling quite well, but was taken about 2 -3 (lockdown) stones ago - the neck is even bigger now! I don't think Yamaha make these any more, and I don't want harnesses, or things with plastic clips, just a long sling with a proper hook. Can anyone help (apart from the obvious "go on a diet")?View attachment 20103
The jazzlab would fit you but you might find it aggravating. Since starting this thread, i investigated most of the options, none of which turned into a purchase, so I’m still grinding on with the jazzlab, and I’m a big guy (6’3 90kg).

It is much worse playing sitting down than standing, so if you play in concert bands or that sort of thing regularly, I wouldn’t suggest it.
 
I always recommend the (rare) kind of strap that goes around like a belt and uses a buckle. 1) It doesn't strangle you; 2) the length is always correct, once you get it set.

Way back in about 1984 I made the first one and I'm still using that one on baritone.

I used 1" wide leather strap, with a suitable buckle and suitable hardware store snap hook. For the pad I used two thicknesses of 2" wide leather, sewn together and with slots in the upper layer to pass the 1" strap through. This way the 1" strap is bearing on two thicknesses of 2" leather except where it passes through those slots. A picture would be a lot of help but the strap is 2000 miles away from me and in the bari case under a huge pile of stuff, so I can't provide it.
 
I always recommend the (rare) kind of strap that goes around like a belt and uses a buckle. 1) It doesn't strangle you; 2) the length is always correct, once you get it set.

Way back in about 1984 I made the first one and I'm still using that one on baritone.

I used 1" wide leather strap, with a suitable buckle and suitable hardware store snap hook. For the pad I used two thicknesses of 2" wide leather, sewn together and with slots in the upper layer to pass the 1" strap through. This way the 1" strap is bearing on two thicknesses of 2" leather except where it passes through those slots. A picture would be a lot of help but the strap is 2000 miles away from me and in the bari case under a huge pile of stuff, so I can't provide it.
That's a very good idea - I particularly like the idea that once set it will always be the right length! I have an old, but serviceable, 1" leather belt which will do to try this. I don't know it's length but if it went round my waist then it'll have length to spare! Many thanks! 😀
 
The picture is a bass clarinet strap but it's made much the way my bari strap is made. Note how the wider part is attached to the thin strap by passing through some slots. Now if you had a second, also wider, part (same width as what you see here) and you put it on the "inside" against your neck, and then you sewed the two wider pieces together, you'd have the narrower part bearing on TWO thicknesses of wider leather (except at those little slots) and that spreads the load quite nicely.

bc strap.webp


In fact for alto I use one of these exact straps, only I take one hook off and shorten it (punch new holes as needed).
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,680
Members
8,134
Latest member
banjo
Back
Top Bottom