Tech/maintenance Bare brass temptation

Here's the 21 back from wet soda blasting. A burnished smooth to the touch finish this time...

20230203_115357.webp

20230203_115425.webp

20230203_115449.webp
 
I'd be curious to know the weight difference before and after to see how much material has been removed as a result of the process.
According to t'internet soda blasting is non-abrasive to the substrate. Therefore no weight is lost.
Just repeating what I discovered.

Here's an example: The Advantages & Disadvantages Of Soda Blasting

This may be better:
"...baking soda’s attributes allow it to remove contaminants without damaging the underlying substrate." From...

I read last week that the wet soda blasting "moves" the surface of the brass to form the revised finish. Can't remember what they called it... Peening? Burnishing?
 
Last edited:
Just had Paul carrington nitromurse this mkvi , the lacquer that was on it was really bad it was like some one had sprayed it with a clear coat and was flaking , I’m really happy with the result , it’s cosmetically better and plays really well from Paul’s usual great service oil and adjust
image.webp
 
I'm having my very old, corroded, damaged and now leaking alloy car wheels refurbished next week. That means being media blasted and powder coated in a tasteful gunmetal grey. £70 + VAT per wheel.

If anyone would like me to take in their saxophone I could tell the company it's a wheel and see if they will do it too. 😡

Rhys
 
No but I’d like to see your wheels after , thinking of having mine done

I'll do some before and after pictures of the wheels and share them.

When I drove up to have the wheels assessed and discuss the finish, most of the cars there were flashy and new having fancy bling finishes done. My 13 year old Ford held together with gaffer tape seemed to lower the tone.

Rhys
 
My chappie works with a powder coater but they can't do brass, which seems odd as it's a great conductor.

Anyhow, how about: Copper & Brass | EverbriteCoatingsUK.com | United Kingdom

My quick armchair research on the internet leads me to believe that you can power coat brass but you need to find someone who is experienced working with it - I suppose there's not many brass parts on cars:

"The trick to powder coating brass is to use an appropriate cleaning system to ensure the surface is perfectly clean. Second the dry-off and cure temperatures need to be closely controlled and monitored to ensure the brass does not turn red (oxidize), especially if a clear powder coating is to be applied. Lastly, if your chandelier has cast brass components, you need to instruct your coater to eliminate the incidences of out-gassing."
 
Lastly, if your chandelier has cast brass components, you need to instruct your coater to eliminate the incidences of out-gassing."
Ah yes, the dreaded out-gassing - whereby you buy horns/accessories in the mistaken belief that they will improve your playing, and subsequently sell them on when they don't turn you into Art Pepper overnight...
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,564
Members
8,133
Latest member
walthang
Back
Top Bottom