Tech/maintenance Arguably the most beautiful saxophone ever made

I gotta say, that is a great looking horn. I like the stylized font on the bell.

Yes, that Art Deco print is striking isn't it? Funny thing about it, it isn't engraved. It is actually stamped. The bell is actually ever so slightly flatter where the print is--something that can be felt when you pick the horn up by the bell.

Chadd, the owner of World Wide Sax where I bought the horn, also had an alto Olds Super at the time I picked this up a year ago. We compared the two minty horns thinking that the bell was perhaps damaged, but that's when we realized that both were the same. When we carefully examined the bells, we realized that the very subtle flattening on the "engraving" was identical, and was indeed stamped.

You made your case. 🙂 That Olds is truly unique with the "cupped" shape key cups. There is nothing more exquisite than polished silver alongside a satin finish. Music Medic has finished a couple of their "Uberhauls" in this fashion. Do you own the sax yourself?

This horn's finish is the original one. I hadn't seen one like it before I got it... but then more often than not these rare horns are seen in pretty rough shape, or unrestored. As soon as I saw this one though, I saw its potential. It was clear that it was minty, and just needed my tech's loving touch to bring it back to [better than] its original state.

It had been exposed to water at some point, so I not only had to have it repadded, but resprung. I opted for piano wire to give it a buttery feel when playing. It feels fantastic under the fingers! For pads I did go with black roo, and for resos I went with sterling silver Resotech ones, which were originally intended for a Mark VI bari.

The result? When paired with a Claude Lakey Jazz MP the result is a lush, rich sound that is quiet and lovely when you want it to be, yet screams like rocker when you need it to. All in all, this Olds Super is a museum-quality horn that goes out with me on occasion to rehearsals and shows, and gets used regularly when I teach lessons, because it has the ability to demonstrate most of a tenor saxophone's most desired qualities. (With the exception of the performance of classical music.) 😉

Edit: One thing that doesn't photograph well is the colour of the MOP. The keys actually have a blue/green hue to them. They look unlike any other pearl key touches I've seen on a sax before. They, just like the horn itself, are extremely striking.

Interestingly enough, the rollers are made of ivory.
 
Last edited:
Piano wire. That is something I haven't heard of before. Will have to look into that. It is getting harder to find top quality blued needle springs these days. The Kraus stainless steel springs are excellent, but not having a point they do not work with small spring cradles designed for a "point" and they make your pro sax look more like a student horn. 🙂
 
The piano was David's (my tech) idea, b/c I absolutely did not want blue needle on this horn. I felt the blue needle would detract from look of the horn. We talked about stainless steel, but then David brought up the idea of piano wire.

David owns Matterhorn Music. He is the only tech who I let work on my horns. He keeps all my vintage babies working flawlessly. In total he has restored 3, and overhauled 1 of my vintage saxes--I think that number is right, but don't quote me on that, it might be higher--over the past 8 or so years. He also keeps all my horns in gigging shape.

David is a really nice guy, and I've connected him with a number of techs from around the world for a variety of reasons. You should drop him a line jbt. He'd be happy to hear from you.
 
I'd never heard of using piano wire for springs before either. I have several rolls of it in various diameters left over from restringing a piano about 30 years ago. Did he grind points on the ends or just leave it straight?
 
The ends are straight. I would have to check for the smallest springs, but IIRC, they too are straight.

I absolutely HATE points on springs. I have gotten poked way too many times while cleaning the pads of my horns. My Mark VI soprano with all its original springs is the worst offender. Sadly, with the little I use the horn, I doubt that the horn will need to be re-sprung in my life time.

As for the Olds, I'm not sure how many different gauges of wires David had to use. I know there was one he was missing, so there was a delay in getting the horn done. He ordered it, but it got caught up in the Christmas delivery crunch, so the sax didn't get finished until January.

I know David regularly keeps a variety of piano wire in stock. Not sure what he uses it for, I thought he mentioned it was for springs of some kind, but maybe I'm dreaming. Given I've had so many previous horns restored by him, I know it's not normally on saxes however.
 
Which begs the question I've never thought to ask

Why do sax springs have pointed tips?
To stick your fingers with. 🙂 The serious answer is that the pointed tip in a small spring cradle has less surface contact area and therefore less friction. That is my theory anyway. It also helps when inserting the spring into the small hole in a post. It also helps when you want to use springs to make "pig stickers" to hold small pieces of cork and felt. This, by the way, is also the reason God created drumsticks. 🙂

drum stick 001.webp
 
If the needle spring rests against the key cradle so that the cradle is in the middle of the tapered spring end, as the key moves the cradle rubs up and down the taper, am I correct? If so, does this mean that when the cradle is headed toward the spring point it is both running "downhill" toward the point, and with less friction as the spring gets thinner and thinner. This would give a helping hand to this direction of movement.

Conversely, as the cradle moves toward the thicker end of the tapered spring section it has to move "uphill" and fight the ever thickening friction of the spring's larger radius.

Am I over thinking this? :w00t:

I guess Yamaha fit non-pointed springs so as to give equal friction both on the key press and release, and so the spring can be fitted without the cradle contact point being so precise?
 
For what it's worth, I noticed that the subject of this thread, a "King Super 20" and Helen's superb "Olds Super" both have Super in their name.

As it happens, I shared a few images with Helen this week of a couple of my horns, one being a "Super Rex"!

In France, Rex is frequently associated with a dog's name. I'm not sure why, but it is apparently not just French as revealed by this TV series I didn't know about.

Anyhow, if you are curious, check this article and you'll discover my Super dog of a horn. 😛

Super-Rex-1018-#C.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,056
Messages
578,173
Members
8,127
Latest member
PJ2116
Back
Top Bottom