Saxophones American or Mexican Conn?

"Tenor conn with new putas in good condition with gig bag."

Hmm, might really be from Mexico.

As to " "Mexico" Conn, are they made by mexicans or made in Mexico? Maybe made by mexicans in Mexico?":

Not being from the Southwestern US, you may not be aware of the ethnic dynamics in that area. Nogales is a city which straddles the US-Mexico border. There are many such. Generally, the Mexico side of the city is quite a bit larger and more populous. There are manufacturing companies on both sides of the border, depending on whether their parent company derives more benefit from locating in the US or Mexico (the two countries have very different tax regulations). The workers will be 99% of Mexican heritage, all speak Spanish, and they may live on the US or on the Mexico side, depending on their own family circumstances. They may be Mexican citizens, or they may be US citizens. Often companies hire entire families to work in their factory. You may very well have two brothers working in a factory, side by side; one of them is a Mexican citizen who lives on the US side and the other a US citizen who lives on the Mexico side.
 
A guy told me that then Mexicans were/are good instrument workers. Conn's problem back in the 60's and 70's was lack of QC. Ok, it was old constructions. But Conn couldn't compete with Yamaha and Yanigisawa (stencils), SML ..... it was just too much money for a Conn (student) sax. A Corton Deluxe alto (yanigisawa A5) was around 3900 s e k back in the late 70's. A Conn Director was around 5000.00 s e k. The guys that bought a Conn or Buescher back then were often buying with their hearts.
 
Well, Mexicans who are careful people with good attention to detail and mechanically adept will make good musical instrument assemblers. Mexicans who are sloppy, unmotivated hamhanded dolts with no sense of how small mechanisms work, won't.

Just like Americans, Germans, Nigerians, or Argentines.

Over and over again we see that Dr. Deming pretty much had it right: the quality of manufactured items depends on the systems of control and management and whether the design lends itself to quality of manufacture. What it doesn't depend on is the nationality of the people doing the hands-on work.
 
I think @turf3 has nailed this in so many respects. I also make it as a 1961 (ish) sax. As a European, I didn't know until fairly recently that Nogales straddled the border (how would I?). The point about the same bunch of workers being employed in the old and new factories across the border sounds very plausible. The comment on economic viability mirrors what has happened in so many industries, in pretty much all mature economies.

Price? Looks a bit high to me if it's a private sale, which I presume it is, judging by the pictures. If the seller is really a sax player, and they can give a full and convincing description of condition of the wear items, it might be OK. Without that, I wouldn't touch it at £500. It looks a bit battered, which is fair enough for a 60 year old sax, and isn't that important if the playing condition is all good. If it's not, as well as the purchase price, you might have to spend hundreds to get it working well, after which you will have a sax worth £500
 
A guy told me that then Mexicans were/are good instrument workers. Conn's problem back in the 60's and 70's was lack of QC. Ok, it was old constructions. But Conn couldn't compete with Yamaha and Yanigisawa (stencils), SML ..... it was just too much money for a Conn (student) sax. A Corton Deluxe alto (yanigisawa A5) was around 3900 s e k back in the late 70's. A Conn Director was around 5000.00 s e k. The guys that bought a Conn or Buescher back then were often buying with their hearts.
There was nothing wrong with USA-made 1960's Conns, quite honestly. Nothing at all.

And quite honestly, Mexiconns, while they did show a lack of fabrication precision....one these things were/are attended to by a tech (primarily key play/slop, occasionally but regularly-occasionally the need to bend key arms/fulcrums because their casting was misaligned) they are really as reliable as a USA one.

I read a great essay by a former foreman of Rogers Drums, a company which was bought out in the 70's and production moved from US to MX.
He was moved there as well.
He said it wasn't the fact that Mexican workers were 'inferior'...but rather that the quality and precision fell off because, although they received training. they were relatively new at doing what they were doing (building drums to a pro brand's specifications) and there was always gonna be a learning curve, compared to a factory of workers who had been doing it for 10-20 years.

Thus...yeah, the labor costs for the company were DIRT cheap....but...what the company failed to realize was that the amount of reject results which had to be either tossed or re-done ...simply due to lack of fabrication line experience...made the entire "cheap labor = bigger profits for us !" rationale a no-go.

Nogales the town existed before the US-MX border was set, thus you get that sorta situation.
Back in the 70's our government and populace wasn't all that fearful of an open border (physically). Fear, blame and race baiting really kicked up several notches in the Reagan era.

I know folks here who grew up in Paso in the 70's-early 80's...and said their families would literally walk into Juarez with no checkpoints whatsoever, and likewise Juarez folks would do the same.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,577
Members
8,133
Latest member
walthang
Back
Top Bottom