Mouthpieces Windy City Woodwinds Alto 56 issue.

Profusia

Member
Messages
768
Location
Worcestershire
Hi all, bit of a long shot but, are there any users of Windy City Woodwinds mouthpieces on here? Specifically the Alto 56 3D printed (probably MKi)

If so wondering how you've found it plays, and whether the mouthpiece alone is centred around an A in pitch?

As you probably know WCW have stopped trading, and although they put their mouthpiece specs on the thingiverse so that people could 3D print their own, this either didn't include their 56 range (or possibly it was later withdrawn)

Anyway I managed to get one, for alto, 2nd hand (supposedly unused) from eBay. It's not clear if it's a MKI or a MK2 and is just stamped with 75 (0.075" tip opening presumably)

However I'm wondering if it's counterfeit, or defective, as it won't play at all on the alto, and on it's own produces a pitch that seems to be centred around B or C. It's definitely alto sized though and clearly not a soprano piece (I don't think WCW ever made soprano pieces anyway). I suppose it could be a "home made" experimental piece using tweaked thingiverse dimensions that went badly wrong, so they decided to unload it on eBay.

Any thoughts welcomed, particularly from WCW 56 users. Thanks in advance.
 
I have been using a tenor WCW 64 in a .115 facing and have had great results. It plays in tune and has excellent response across the entire range. It may have been the last mouthpiece sold by WCW when I bought it last spring. I am a little concerned about the longevity of the 3D-printed mouthpiece that they produced. I also have one of Brian's pieces from Get-a-Sax. The base material in this mouthpiece seems far superior to the WCW. My usual process is that I play one of these new mouthpieces for a while, and then I go back to my Florida STM.
 
I have the original WCW 56 alto mouthpiece and have no problems with tuning. However, the position of the mouthpiece on the neck is much further from the end of the cork than my classical mouthpiece - it would be very sharp if I pushed it on further for those notes with a shorter length of tube vibrating.
 
I have the original WCW 56 alto mouthpiece and have no problems with tuning. However, the position of the mouthpiece on the neck is much further from the end of the cork than my classical mouthpiece - it would be very sharp if I pushed it on further for those notes with a shorter length of tube vibrating.
Thanks for that. That's helpful to know. Have you ever tried blowing just the mouthpiece to see what note it's centred around? Also can I ask if it's stamped with a number (maybe 75 or 80 or something else), and whether it's stamped with MKI or MKII or anything like that?
 
All my alto mouthpieces produce a". There is only the [56] stamped on the side and the WCW logo. At that time, it was only available in a "7" tip opening, so no need to indicate anything else.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,315
Members
8,127
Latest member
PJ2116
Back
Top Bottom