Tech/maintenance Walstein straight sop necks rotating... solution?

DavidUK

Well-Known Member
Messages
8,133
Location
Near Evesham, Worcestershire
Another sop picked up today. An SSS-P straight soprano. I imagine it's about 10 years old, very clean, great pads, lovely feel to the key work.

Whichever neck I insert into the body, and tighten the neck screw, the neck still swivels easily.

I know not to overtighten but is there a DIY solution? I reckon I'm best adding it to those going to Paul Carrington on Friday, as he'll probably just wave his magic wand and the problem will be fixed.

By the way, this and a similar Tenon WWB "Vienna" sop (also going to PC for a set up) have an identical issue. I can play both all the way up to top C but moving to top C# they both drop an octave. This makes me think the problem is me, on soprano which I haven't played a lot of, but there again the W has a neck leak and the V may have another issue.
Yes, I know, get them both sorted/checked at the tech then have another go...
 
Last edited:
DIY solution: Solder it.

A real tech will expand the tenon to fit, but I’ve never liked the neck joint of a two-piece straight sop. Yes, you would then need a case to fit, but the upside is it will never leak again.
 
Another sop picked up today. An SSS-P straight soprano. I imagine it's about 10 years old, very clean, great pads, lovely feel to the key work.

Whichever neck I insert into the body, and tighten the neck screw, the neck still swivels easily.

I know not to overtighten but is there a DIY solution? I reckon I'm best adding it to those going to Paul Carrington on Friday, as he'll probably just wave his magic wand and the problem will be fixed.

By the way, this and a similar Tenon WWB "Vienna" sop (also going to PC for a set up) have an identical issue. I can play both all the way up to top C but moving to top C# they both drop an octave. This makes me think the problem is me, on soprano which I haven't played a lot of, but there again the W has a neck leak and the V may have another issue.
Yes, I know, get them both sorted/checked at the tech then have another go...
Paul will have a tenon expander, and will do it in minutes.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,623
Members
8,133
Latest member
walthang
Back
Top Bottom