Tech/maintenance Super glued pads - a cry for help

If it needs freezing, why not freeze it in a freezer? Seems like a lot less faffing about if slower.
I agree. Still there’s 24 cups to do. Then any residual to clean off. At that point maybe the acetone would help ?
At some point the remaining thickness of CA is of no consequence. Check to see if shellac bonds to CA.
 
I would NOT bet on cold temps doing anything. You're hoping that the difference in coefficient of thermal expansion is different enough between brass and CA adhesive that it will break the bond. Far more likely that there'll just be some crazing in the CA as it breaks into little "islands" each of which remains firmly attached to the brass. If anything's going to be affected it'll probably be the clear lacquer on the other side of the key cup.

What people don't think about is that you don't really have much room to work, practically speaking, on the cold side of things. About the lowest temp you can apply in a workshop would be LN2, and I have no idea how you could get access to this in a home shop, and that's -196C at best. If "aerosol freeze spray" can give you -60 F, that's -50C. Your home oven can give you 500F or 295C, and a torch can far exceed that. I have tried many many times to get stuck bearings out, or do other types of shrink fit work, and even with LN2 trying to do it with cold was almost always a bust.
 
To quote Philip Marlowe in Dead Men Don't Wear Plaid: Heat doesn't work, cold does

It is one of the more common problems with outdoor equipment during the winter season. Glue just falls off. If you ever worked outdoor at -40 degrees you would understand. Or get in your car and the rearview mirror lies on the dash (if you are lucky).
 
See

Or

Eff?
Or
1794813792075.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,196
Members
8,127
Latest member
PJ2116
Back
Top Bottom