You are moving to the town where I was born, nice!<SNIP>
I'm about to move to Oostende from Antwerp. In Antwerp I put a lot of time and money into building a well isolated shed and then sticking a used Esmono practice cabin inside. In the end, I had a great practice room where I could practice at 6 am without bothering anyone. (not that I did... I was in there before 8 a couple times though).
<SNIP>
Aside from wondering if the floor can handle the weight, I'm also starting to wonder if it's really necessary. The sound booth doesn't isolate through the floor unless I buy flooring which is extra, and I'll need to do some work to isolate the floor of the house as well anyway. The walls to the left and right are brick and supposedly very solid so I don't need to isolate those, or not so much. One wall faces to the street, so I only have to isolate it if neighbours complain. So the main isolation I need, is just the floor, the wall entering to the house, and the part of the ceiling with a loft bed above it.
So, I'm thinking to isolate the floor between the joists with rockwool or similar, then replace the wood planks with big sheets of particle board or something similar, dense, heavy flooring. Then cover that with thick rubber. Above that I can build a room within a room but possibly skip the wall facing the street? The walls would be sheetrock over a wood frame with rockwool inside then two layers of sheetrock separated by green glue. Would need to install a fire door.
For the outside wall I think the main obvious issue is the window but maybe I can just make a sort of removeable panel i can take on and off. Or some kind of door.
OK, I'm not exactly sure what the question is so much as... what do you think? Any suggestions, things I didn't think about?
First of all, I don't have a lot of experience in sound-proofing practice rooms. But I did take a course in Noise polution about 25 years ago, so I have some theorethical knowledge I want to share with you.
I would not try and put a sound booth in that room, seems not very feasible.
First, look for "gaps", you need to fix those first. even small gaps (between the wall and floor for instance) could leak a huge amount of sound. Maybe use some king of leak light. When the room downstairs is dark, use a stong light and walk arround the top room with it while sombody looks for leaks in the bottom room. Just thinking out loud here ......
I would start by isolating the floor, that will make a huge difference.
Your idea of putting a rubber mat on the floor as a base layer seems very sound.
Some general principles to keep in mind:
- make sure there are no contact points between te inner layer (where the sound is) and the outer layer (where you want it to be quiet). Use some kind of buffer between them.
Contact noise is the hardest to get rid of, and this transmits the bas-sounds the best
That's what the rubber layer would do quite well I think - you want an isolation material that has a lot of mass, but also some air in between, that is what you need to dampen the sound waves. Compressed rock wool or sand are very effective for this. Sand is of course less handy here because of the weight (works well for speakers though)
- Using wood and carpets can help, but they do more for creating a comfortable sound within the room rather than isolating noise pollution towards the neighbouring rooms.
