Accessories Show us your reedcase

Rather than starting a new post, I chose to stick with this thread since the Vandoren sleeves have been mentioned a time or two...

Other than eBay, can anyone recommend a way to source some Vandoren reed "sleeves" (the clear ones from the factory, or red, in the case of Vandoren Juno) for alto, tenor, and/or soprano reeds? Though I lean toward Rigotti reeds, their factory sleeves are a bit too wide for the Witz air-tight/water-proof containers that I use; plus, I prefer sliding a reed into a sleeve laterally by the "butt" end rather than chancing chipping or breaking the tip of a reed by inserting the reed into the case tip first, as one does with Rigotti and D'Addario factory sleeves. I am about to place a bid for a package of 20 Vandoren tenor reed sleeves, but other online searches haven't proven fruitful. Any advice would be greatly appreciated!

Thanks,
Aaron
 
@AaronTMartin78 , is this what you're talking about?

If so, that's not a great idea. Those are intended to protect the reeds in shipping. They're not stiff enough to mitigate warping. I recommend a traditional reedgard like D'Addario and others sell, or anything with a hard, flat surface.
dw_drgrd4acbk_main.png
 
@AaronTMartin78 , is this what you're talking about?

If so, that's not a great idea. Those are intended to protect the reeds in shipping. They're not stiff enough to mitigate warping. I recommend a traditional reedgard like D'Addario and others sell, or anything with a hard, flat surface.
dw_drgrd4acbk_main.png
Thanks for your reply, Lydian.
Yes, I have some of the D'Addario cases, the Rico 4-reed case that came before it, and also the D'Addario 8-reed case with the slot for the Boveda humidity control pack. I like all of those, but I like my current setup more (I guess it could be considered "wet" storage, though the reeds are far from being kept soaking); here it is:
20230208_181718655_iOS.webp

The sponge is nearly saturated with 100-proof vodka. This storage method has been working quite well for me; the reeds are not warping (at least to my eye), they're ready to play at any given moment, and they are lasting a long time (my first attempt at "wet storage" was using Listerine Essentials [the clear variety] and keeping the reeds completely submerged, but this proved to be pricey while also giving the reeds an undesirable---and understandably---"soggy" response and sound; I abandoned this method).
The Vandoren sleeves work the best for this particular case, though the tenor reeds are a bit of tight fit.
 
@AaronTMartin78 , is this what you're talking about?

If so, that's not a great idea. Those are intended to protect the reeds in shipping. They're not stiff enough to mitigate warping. I recommend a traditional reedgard like D'Addario and others sell, or anything with a hard, flat surface.
dw_drgrd4acbk_main.png
Unable to find one to purchase, I made one from 4 D'addario transit guards and some double sided tape.
 
They don’t sell anything like D’Addario reedgards in the UK? That’s unfortunate. You shouldn’t have to make your own out of old packing materials and tape. I’d be happy to send you one at cost plus shipping.
 
@lydian The new D'addario ones were unavailable/out of stock at the time.
The Rico and la voz ones had a flat surface for the reed to rest on. The new ones have a ribbed surface that crinkles the reed.
So I made my own.
The ribs let the reed dry and keep it from sticking. It's a good thing and harmless. They are much better for the reed than those packing sleeves. There are plenty of decent reedgards out there. I see at least 7 here, one of which is only 4 quid.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,623
Members
8,133
Latest member
walthang
Back
Top Bottom