Saxophones Sentimentality vs value: Refurbishing a Holton alto sax family heirloom

Bugger - I just knew that this would turn out to be a job beyond me ...

Shame really as I would really like to have a crack at it ...

I don't really think it is viable for me to start a new career and to construct a mini workshop just for the fun of it ...

However - Is it perhaps realistic and achievable for me to carefully strip down the sax ...

Including all the parts which may need replacement ...

Then send the damaged parts [selected for renewal] to a technician who may be in a better position to manufacture or source replacement parts on my behalf? Or am I in dreamland ...

-------------

Thanks for your detailed reply and advice ... I really do appreciate it ... :thumb:

Hi Sunray

I'm a bit surprised you seem to have talked yourself of out of it before you've started.It certainly isn't rocket science and unless your brother is going to hate you for the rest of your life for wrecking his neglected old and basically valueless sax (I'm not trying to knock you by saying this merely putting things in perspective )what have you got to lose,answer nothing and what have you got to gain,answer lots,it's a great little hobby and very interesting and you can learn as you go.Dismantling a sax isn't that difficult the biggest problem is if the rods and screws are seized in and so it becomes difficult to remove but there are ways round this,and as far as thinking they are all going to need replacing you will only know this after it's in bits.Just take your time you're retired aren't you it's a great hobby and think of the satisfaction you'll have when it looks like the one in the picture and you've done it.
Go on have a go you know you want to....good luck......John
 
Hey Hey John ... [wiv der Jag and a shiny new iPad] ;} Nice to see you active again ... :thumb:

Trouble is mate - I have to far many hobbies, interests and other things to keep me 110% active most of the time ...

Since I retired I have regularly wondered how I ever had the time to go to work ... :shrug:

-----------

The simple fact is - I already have a very nice Yanagisawa 992 Bronze Alto. I also have my beautiful Yanagisawa T9932J Tenor, which has just been replaced [Brand New] under a warranty claim. So it's very unlikely that I wouldn't be keeping the Dearman for myself - Although I must say it is a rather nice instrument ...

I'm sure your right regarding the rods not needing much work, Its only the heads are a little bit chewed up on a couple of them as they are stiff. The sax isn't that difficult to strip and clean but the repair can be quite tricky and time consuming.

I believe that the Dearman needs a new home where I am sure it will make someone else really happy.

Thanks for your encouragement though mate ... :clapping:
 
Well, here it is! I must say that it hasn't looked this good (or played as well!) in many a decade! I first tried it out with it's original mouthpiece and it sounded horrible!! It was all muffled and the low register warbled like there were four or five pads leaking! I almost turned around and took it back to my tech to find out what was wrong when I realized that he wouldn't have given me the sax unless it was working properly. I took out a Yamaha 4C and it was night and day! Everything worked like a dream all the way up to the top (which I never used to be able to do on this sax!) It has a couple of spots where the silver has worn down to bare brass but all in all, I think it turned out rather well! Here are a couple of shots:

http://1stclass.mylargescale.com/stevestockham/Sax/Holton.JPG

http://1stclass.mylargescale.com/stevestockham/Sax/Holton (10).JPG
 

Attachments

  • Holton_Small.webp
    Holton_Small.webp
    10.8 KB · : 403
Last edited by a moderator:
Now? I guess I'm having a bit of a nostalgic "thing." I kinda want to see that little alto shined up with new pads and set up properly! It'll never be worth the money I'm sinking into it but I think that it'll be worth it to me!

Excellent decision! Sometimes (often) it's not about the monetary value of things.
 
My hobby/profession is restoring vintage saxophones. There is not a lot of money in it because of the enormous amount of time involved to do it to perfection, but I get a great deal of pleasure giving a new life to the great old instruments of the past. They should be bringing musical enjoyment to someone like they did when they were new rather than sitting tarnished and broken in a case in someone's attic or basement. Below is a Buescher True Tone that I recently sold on eBay. I have an affinity for silver instruments and have restored several. I would be happy to share some of my tips and techniques if anyone is interested.

TrueToneAlto126.jpg

This is beautiful,I have one identical in nr mint condition awaiting overhaul,what a lovely job you have done!-and close to my own heart as is what I am basing my website on!
 
Well, here it is! I must say that it hasn't looked this good (or played as well!) in many a decade! I first tried it out with it's original mouthpiece and it sounded horrible!! It was all muffled and the low register warbled like there were four or five pads leaking! I almost turned around and took it back to my tech to find out what was wrong when I realized that he wouldn't have given me the sax unless it was working properly. I took out a Yamaha 4C and it was night and day! Everything worked like a dream all the way up to the top (which I never used to be able to do on this sax!) It has a couple of spots where the silver has worn down to bare brass but all in all, I think it turned out rather well! Here are a couple of shots:

http://1stclass.mylargescale.com/stevestockham/Sax/Holton.JPG

http://1stclass.mylargescale.com/stevestockham/Sax/Holton (10).JPG

Looks great. Your sax looks like a "Revelation Alto". I had a Revevaltion alto 32XXX and that sax was confirmed by Leblanc to be from 1927 (late). The keys on the rh are the keys that called "The Holton Master Keys" C-D and G sharp thrill keys.

Thomas
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,679
Members
8,134
Latest member
banjo
Back
Top Bottom