Tech/maintenance Realigning a Yanagisawa bell

If you have to ask, it’s best to take it to a tech.

But if you must…. Loosen the bell brace and body joint, realign, and tighten the screws. Be aware that you may have a corrupt seal of the body/bow joint so test for leaks before you call it done.
 
Any tips on how to realign my bell? The B and Bb pads are only just about reaching the each of their tone holes so it has clearly taken a jolt and is misaligned.
A picture would help. There’s a lot of different variables in the types of builds to different horns. I’m assuming on this one the arms to those bell keys come off the main body?
 
It's a job for a professional.
Yes, you can give the bell a bit of a whack with the palm of your hand - but it hurts, and the results can be unpredictable...especially if you're inexperienced. And you probably still won't get everything back to where it was.
Hit the bell hard enough and you can bend the rim.

A better technique is to place the body of the horn between your thighs and apply pressure to the bell. In most cases the bell gets knocked to the right (in the playing position) and will have to be moved left.
Both of the above methods risk bending the body slightly.

A repairer will probably use a bell brace lever, which applies leverage across the brace in a very controllable manner.

In all instances it's often necessary to adjust cup angles and/or pillar angles as well as reset the pads.
 
Can you provide a picture, or give more detail into how this is done. I'm tired of having my hand hurt. 😉
Here ya go.

bell lever.webp


You place a rod of Delrin or hardwood where the arrow is pointing, and this splits the leverage points between the mount on the bell and just slightly forward of the body mounts. The downward force on the body mounts helps to prevent the screws from stripping out.
Easy enough to make. Best bet is to start off with a strip of aluminium or thin steel, bend it until you've got the desired profile - then copy the shape in heavy steel.
You can adapt the principle for almost any bell brace.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,677
Members
8,134
Latest member
banjo
Back
Top Bottom