Saxophone beginners Putting the sax to bed

Here is the history of the HW Padsaver. In the early 1970’s I attended Berklee and the New England Conservatory in Boston. While there, I had my alto overhauled by the famous Emilio Lyons. Part of that service included putting a bassoon cleaning brush inside the horn; it was attached to my end plug.

In 1973 I moved back to the San Francisco Bay Area, and needed a service on my clarinet. I took it and my sax to House of Woodwinds in Oakland, where I had purchased those instruments as a teenager. I showed the overhauled alto to George Koregelos, owner of House of Woodwinds. He thought the painted pads were funny, but the bassoon brush intrigued him. He had just bought a bunch of machine tools, he was just starting to make flute head joints at the time. He worked for a year developing what became the pad saver. Finding a fiber that didn’t shed, and getting the shape right for a saxophone were the main things. I and several other local saxophonists became beta testers for what he called the “Shove-It”. For many years they were made right there in the little shop in Oakland.

Eventually, George started HW Products to sell the (renamed) Pad Saver, and a few other woodwind related products. It’s the last remaining vestige of what was once a glorious place to buy horns, mouthpieces, reeds and just hang out.

Regarding the proper procedure for using the Shove-It (er, Pad Saver), I just stuck it in my horn after the gig or practice, for many years. I shook and rubbed off the moisture before storing it in the horn, and putting the horn in the case. I used a chamois pull thru for the neck and mouthpiece (I make these myself, they work better than any commercial swab). Like @jbtsax, no damage to horn or pads from this procedure.

Nowadays I use a chamois pull thru for the body of the horn too, except for my one-piece soprano which gets the Shove-It treatment.

Absolutely take the reed off the mouthpiece after playing, and dry the mouthpiece to prevent the build up of calcium deposits. Use a very soft cloth or chamois for this to avoid damaging the rails of the mouthpiece. Store the reed in a reed saver type case, the cheap D’Addario ones are great, and rotate through different reeds each day.
 
Do NOT keep the Padsaver inside the instrument, or inside the case. Anybody who says it's ok to keep the Padsaver inside the instrument is just plain wrong, dealer or not.
As someone (like JBT) who daily sees the results of using/not using various care regimes over a very, very long period of time I can tell you that leaving a Padsaver in the bore will not result in any significant damage/deterioration.
 
I drain the Baritone often or when it either goes out of tune or starts gurgling.
I suppose I must be a very wet player.
That actually brings me on to my next rookie question which I'll post seperately to avoid any confussion but my mouth gets very wet when playing and the mouthpiece is dripping after my practice which is currently only about 30 minutes and not all of that is playing. I was going to ask how wet is wet?
 
That actually brings me on to my next rookie question which I'll post seperately to avoid any confussion but my mouth gets very wet when playing and the mouthpiece is dripping after my practice which is currently only about 30 minutes and not all of that is playing. I was going to ask how wet is wet?
Sounds like you’re not blowing hard enough. My mouthpiece has never dripped.
 
And don't forget to latch the case after you've done all of the above. It's a terrible thing to go through all of that and then watch everything fall out when the case is picked up.
Can I get a witness?
 
And don't forget to latch the case after you've done all of the above. It's a terrible thing to go through all of that and then watch everything fall out when the case is picked up.
Can I get a witness?
It clangs better with a 1961 mkVI
 
Use the "long brush" (Padsaver) to dry the inside bore when you are finished playing. Do NOT keep the Padsaver inside the instrument, or inside the case. Anybody who says it's ok to keep the Padsaver inside the instrument is just plain wrong, dealer or not. Use a saxophone end plug when you put the instrument away.

Count me among experienced players that have been using PadSavers (ShoveIt) for 20+ years on sop, alto, and tenor.

Check your PadSaver when you pull it from the horn the next day after use. If it is still wet, then it is trapping moisture in the horn; if not wet, then there exists sufficient humidity gradient in the environment to draw moisture from the horn, and it is alright to leave it in the horn.

One needs to be smarter than a spit swab to determine how best to use it.
 
Nowadays I use a chamois pull thru for the body of the horn too, except for my one-piece soprano which gets the Shove-It treatment.
A good pull thru swab is doing a better job than a Pad-Sawer because it take care of bow as well. I use both swab and pad-sawer. The pad-sawer also take care of the tone holes/chimneys. I play Martin saxes with soft-soldered ton holes and I believe that dry tone holes joints is better for my Martin saxes.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,592
Members
8,133
Latest member
walthang
Back
Top Bottom