Tech/maintenance Possible spring issue

Barge

Member
Messages
11
Location
Yorkshire
Hi,

Alto playing fine down to low C.
When I try low C#, B or Bb there is squealing noise….. 😬

Hard to diagnose by myself but G# key seems to raise up when I press down C#, B or Bb.

( I’m not sure if this should happen).

Please be kind- early on in my sax journey- thank you 😊!
 
There's an adjuster bar on most saxes that holds down the G# key when you press the left little finger keys. Sounds like it just needs a tweak. On modern saxes they have a screw aadjuster, on older ones you might need to fit a new cork. If it's the screw adjuster type, a little tweak using a fine screwdriver should sort it.
 
Here's the adjuster:

shwwimg_borgani_obs_soprano_adjuster.webp


The one on the left is for the G#, the one on the right is for the Bis Bb.
Note the cylinders of cork poking out from the bottom of the adjusting screws. If they're missing, it will cause problems.

To set the regulation of the G# simply play a low D and give the G# key a press and release. Listen for how the tone changes. If the regulation is really out the note might just die...but usually it just fades out a little.
Turn the adjuster screw an eighth of a turn clockwise then repeat the low D test. Try it with the low C too. Make another small adjustment if necessary....rinse and repeat. If you overdo it, just back the screw out a little and try again.
 
Stephen thank youI just can’t find these two screws on my alto …
Is there anyway you could pan the photo out a bit and show me where to find them?
Thank you 😊

Here's the adjuster:

View attachment 25896

The one on the left is for the G#, the one on the right is for the Bis Bb.
Note the cylinders of cork poking out from the bottom of the adjusting screws. If they're missing, it will cause problems.

To set the regulation of the G# simply play a low D and give the G# key a press and release. Listen for how the tone changes. If the regulation is really out the note might just die...but usually it just fades out a little.
Turn the adjuster screw an eighth of a turn clockwise then repeat the low D test. Try it with the low C too. Make another small adjustment if necessary....rinse and repeat. If you overdo it, just back the screw out a little and try again.
 
Last edited by a moderator:
You know where the low F key is, right (first finger, right hand)? Go two key (cups) up from there.
Or just press the G# and see what key opens up.
 
Note that there may not be an adjustment screw - this started on Selmers with the balanced action horns (I think), but plenty of instruments before and since just use a bar with cork or felt on it. If that’s the case you need to replace the cork or felt, and then adjust the material so that the G# key is held shut, and the stack key (above the F key) isn’t held open.

If that’s the case, and you don’t know how to adjust cork (or felt), go see a tech. It’s an easy and likely inexpensive fix.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,509
Members
8,131
Latest member
Jef B
Back
Top Bottom