Saxophones OMG Barone copper neck on a YAS62II. Unbelievable!!!

Thanks!

Thanks for sharing, is any website where I would be able to see you or hear you playing with your Barone neck?.... Greetings! :welldone

I'm still very happy with the YAS62-II with the Barone neck. Its very free blowing and I've come to think it sounds better than the original Yam G1 neck. I think it may overcome some peoples complaints over the YAS62. Some people say the YAS62 is too bright sounding and too focused. The Barone neck makes it sound much darker and richer and the intonation is much more open allowing more expression.
 
Barone Neck on YAS 62 Mark 1

Hi there,

I have a YAS 62 Mark 1 (no G1 neck), while I love the overall sound and action etc. I have notice similar tuning quirks that you mention below and was thinking about ordering a Barone neck. Did the neck fit stright away or did you have to make considerable adjustments? Also did the neck make the overall pitch flatter or sharper? Many thanks...

Best regards, Tobie

I have spent most of 2 years laboriously conquering the tuning quirks of my 2007 Yamaha 62-II alto with the G1 neck. Yes, Yamaha's "fixed" neck not the original defective neck. Made significant progress but it really works you hard.

WAY flat on middle C# followed by WAY sharp on D half step above it. Back to even on D# and then somewhat sharp on E followed by even on F and flat on G and somewhat sharp on A and flat on B/Bb. In summary, up and down like a coney island roller coaster over the entire middle octave.

I remember asking folks over at sociopaths on the web last year and getting their typical responses like - "You're just no good." "You don't deserve to live unless you play a ____ brand horn like me." "Only mere mortals have problems like yours." "I have a $800 second source neck and a $500 mouthpiece and I don't have any problems, but you just dont have any chops." etc.

So I decided that I just had to man up and tough it out.

But I just got a used Phil Barone copper neck today and my Yamaha alto is a completely different horn. The sound is less "singing" than the G1 neck but richer and with what I call "oboe overtones" I've always associated with Selmers.
an_copper.jpg

And the intonation is phenomenal. Middle C# and D are _PERFECTLY_ even instead of -15/+15 cents. I've learned to play the original G1 neck in tune by pushing the mouthpiece in and tuning the middle C# and lipping the ENTIRE horn down. I've never played any horn with an even middle C#/D before! I didn't even think it was possible.

I would recommend the investment to any YAS62-II owner. 😀
 
Hi Tobie. It was a perfect fit. I dont think the tuning is much different but I push the mpc nearly all the way on with only about 1/8" of the cork showing so I can use a looser embouchure. My horn is much darker sounding now and the lower register sounds more like a tenor now. I don't know if that is because of the copper neck or the neck design.
 
Thanks

Thanks Andy. I'm a bit concerned that my MP is already really far in (it's a smaller design) and may need to go in much further. Glad to hear the neck was a perfect fit though! May be worth the punt. Best, Tobie
 
I had and tryed alot of other necks on my Yam Z tenors and i still go back to the G1 neck,love its free blowing instant response.Yamaha do a new alto neck now,its called the 6 neck.Fancy a try on a G3 neck.
 
Hey there, I have also have a Mark 1 YAS 62 - love it to bits but have also notices the noisey G sharp key - I think it's just that they use hard (durable?) corks, where the key arm hits the metal - I might try and get a softer cork marterial there (really small!) and see if it helps.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,571
Members
8,133
Latest member
walthang
Back
Top Bottom