Saxophones Nexus Saxophone

It's not that it was lacking anything. It had a very neutral voice. Personally I think that the 23 is the most underestimated instrument ever.
I played a borrowed purple logo 62 that was great and a later one at a shop that was too bright for me.

For me 23 and 62 are very very fine tenors. They feel great. The are ultra tuned. Just a little bit bright. When I play a Yamaha everything is fine. The "problem" arises when you compare them with a fat sounding instrument like a Conn, my beaugnier ... Or your Yani .... Then for some reason you dislike the Yamaha... Also Yamahas need minimal visits to the tech ....
 
I was in Headwind in Bristol today when their first Nexus saxophone arrived. They think it is the first shipment to Europe. Sadly, all I saw was a slightly soggy cardboard box (it was raining).
I expect they have all tried it by now.
Are you able to go back there and try it? Until now I haven't seen any review from people who bought it, except from Chad LB. Jack's posted a video recently compare the weight of the Nexus and the Mark VI and the Nexus is really light. It's even lighter than YTS-23.
 
I posted this on another forum in a discussion about the Nexus line after some post that I found unfair based on my personal experiences:

"I live less than a mile away and have been taking my horns to the Boston Sax Shop for many years and have every intention I continuing to do so in the future. I don't like the over the top reviews that people often post, so I will make this one more balanced. I am very excited about the addition of Frank Kozyra and another extra staff member or two. It has improved matters, simply because it seemed at times that Jack Finucane was spread rather thin. The latter can hardly come as a surprise, as the task of growing a brand while keeping up with repairing saxophones is beyond a one wo-/man job, even for the best. If anyone reviewed my performance at work, I would expect the same comment, because it is always a struggle for time. However, that caveat aside and now in the past, I am confused about what is suggested in the negative comments in this thread. In spite of Jack's entrepreneurship, He has never as much as hinted that I buy x, y, or z from him instead of playing the gear that I already own. This includes visiting the shop while he was tinkering with The Nexus, adjusting his necks or packing up reeds for shipping. He has never suggested performing work that wasn't needed or I didn't specifically ask for. I have not had a single quote that wasn't accurate. I have sold horns on consignment with the Boston Sax Shop and it checked out perfectly. Everything has been 100% straight. So unless one wants to criticize Jack Finucane for wanting more than repairing saxophones, I really am at a loss to understand what is behind the negativity. As for sax repairs, there is now Frank Kozyra, who is absolutely top notch and a nice person to boot. Of course, it comes with Boston prices, but there are also Boston salaries and Boston overhead. Compared to living expenses in general in this area, there is nothing out of sorts. Finally, as a disclaimer, I don't own anything of the Nexus brand and have no immediate plans in this regard. I am just a regular amateur saxophone player and customer at the shop, thus far only repairs and consignment sales."

I can add here that it would be foolish to underestimate Jack Finucane (I think Tyler is his middle name). He has a vision for growing a brand and the skills for making it happen. He is young and well respected and has connections all over the saxophone world. In addition, he is excellent at promoting his brand without pushing his gear onto customers. Some of these skills are not among what I would have considered important in life when I was young, but would have been helped greatly in my career had I possessed them and have thus come to acknowledge them.
 
I posted this on another forum in a discussion about the Nexus line after some post that I found unfair based on my personal experiences:

"I live less than a mile away and have been taking my horns to the Boston Sax Shop for many years and have every intention I continuing to do so in the future. I don't like the over the top reviews that people often post, so I will make this one more balanced. I am very excited about the addition of Frank Kozyra and another extra staff member or two. It has improved matters, simply because it seemed at times that Jack Finucane was spread rather thin. The latter can hardly come as a surprise, as the task of growing a brand while keeping up with repairing saxophones is beyond a one wo-/man job, even for the best. If anyone reviewed my performance at work, I would expect the same comment, because it is always a struggle for time. However, that caveat aside and now in the past, I am confused about what is suggested in the negative comments in this thread. In spite of Jack's entrepreneurship, He has never as much as hinted that I buy x, y, or z from him instead of playing the gear that I already own. This includes visiting the shop while he was tinkering with The Nexus, adjusting his necks or packing up reeds for shipping. He has never suggested performing work that wasn't needed or I didn't specifically ask for. I have not had a single quote that wasn't accurate. I have sold horns on consignment with the Boston Sax Shop and it checked out perfectly. Everything has been 100% straight. So unless one wants to criticize Jack Finucane for wanting more than repairing saxophones, I really am at a loss to understand what is behind the negativity. As for sax repairs, there is now Frank Kozyra, who is absolutely top notch and a nice person to boot. Of course, it comes with Boston prices, but there are also Boston salaries and Boston overhead. Compared to living expenses in general in this area, there is nothing out of sorts. Finally, as a disclaimer, I don't own anything of the Nexus brand and have no immediate plans in this regard. I am just a regular amateur saxophone player and customer at the shop, thus far only repairs and consignment sales."

I can add here that it would be foolish to underestimate Jack Finucane (I think Tyler is his middle name). He has a vision for growing a brand and the skills for making it happen. He is young and well respected and has connections all over the saxophone world. In addition, he is excellent at promoting his brand without pushing his gear onto customers. Some of these skills are not among what I would have considered important in life when I was young, but would have been helped greatly in my career had I possessed them and have thus come to acknowledge them.
Though I haven’t had the chance to try his products yet, I love how he pays attention to every single detail of his products. He surely does his job very professionally and wholeheartedly.

Btw, I think Tyler is his wife’s surname.
 
Technically speaking... removing few protection guards and the link levarage on left pinky cluster doesn't make a big impact on the overall weight on the horn.

To reduce more significantly the weight I'd go with the old method: switching from a post-to-rib-to-body construction to a post-to-body construction.
Many Chinese and Taiwanese suppliers can offer this option.

Both Chad LB and Jack Tyler/Finucane know their own stuff and they are marketing monsters.
I really think they'll have success with their new Nexus saxophones... although I can't find any revolutionary on the both versions of the Nexus tenor.
 
Peter Jessen, Copenhagenm made tenors with fiberglass bells. A handmade sax beside from the keys that came from Switzerland,
jessentenor.webp
 
Carbon bells on brass instruments have been around since more than 10 years.
Saxophone carbon fiber necks the same.

Providing other parts of the saxophone made in carbon fiber is feasible... but economically unconvenient.
Yep. That was the prototype for the two outstanding tenors that Peter made next (I have owned both). BTW, Brecker played the horn with the carbon bell and quite liked it.
 
Yamaha started makes sousaphones in fiberglass to make them lighter and more affordable.
I guess this Prototype Tenor is not "more affordable than the full brass one.

For my understanding... Inderbined not only takes the keywork from a Yamaha YAS/YAS-62.
He takes the whole instrument... ""work on"" it and reassemble it.
 
And? What did you think of them?
I loved both of them. They were stamped TS002 and TS003, respectively.

TS002 was a copper horn, but I had it silverplated. It had this big warm expansive sound that I imagine would have been the perfect horn for Lester Young. I don't know if that makes any sense, but that is how I think about it. Intonation was fantastic. I shot some pics for a calender and submitted the collage below:

Jessen_custom.jpg


At that point in life, I had just purchased a condo and didn't have a lot of cash at hand. So I traded TS002 in for TS003. Otherwise, I would surely have kept it.

TS003 was and still is bare brass. It has the greatest projection of any tenor that I have played. I thought of it as "The Rocket". It could obviously be played softly as well, but it was a bit like a Mustang that had to be tamed. In Peter's typical understated fashion "it came out well". That is the horn that Brecker should have played. I am sure that I have pics of it somewhere, but these early ones from Peter are all that I can locate here and now:


Jessen_sax7.jpg

Jessen_sax8.jpg

Jessen_sax9.jpg

Jessen_sax10.jpg


These are images are Peter's, but I 100% certain that he won't mind. I believe they are also on the internet.

The day we finalized the deal, I thought I would walk home with the sax. Peter said he wanted to do something extra and that I should come back the next day. When I did, the horn had "Jessen Copenhagen" engraved on the bell along with beautiful floral decorations. That is about the peak of Peter Jessen's self promotion. He is the most gifted saxophone craftsman and instrument maker that I know of and can make anything, but getting his name out there is fairly low on his list of skills. Hardly a surprise given his background and culture.

For TS002 and TS003, Peter made the necks and the body tubes. He also crafted the tooling to make them with. The keywork was harvested off Asian horn horns, because he made these saxes in his spare time. Kind of ironical to discuss in a thread about the Nexus and Peter's mouthpieces, necks and horns are not lightweight.

I sold TS003 about a year ago to an admirer of Peter's and professional level player, simply because I had not touched the sax in over a year after switching to baritone and my MK7 and SA-80 tenors are pretty much unsellable at a price I would find remotely acceptable. Both TS002 and TS003 are in now good hands that do the horns much justice than I would.
 
Last edited:
If they really love lighter saxs I think Vibrato altos and tenors are great choices with the alto is just 850gr!

The high F# mechanism is about 100gr (on my Yamaha), and removing guard and braces will only introduce more damage to the horns if we drop it, not add more resonance or reduce the weight of the horn significantly.

As Tzadik said, I think post construction is the way to go.
 
I believe many of the horns in the boutique market are either made and assembled in China or from Chinese parts. The biggest operation or factory in China making saxes has been making " Mark vi" models with necks that fit a 6 for several years. I have a student/friend who is a great player who has one . It looks exactly like one of the small shop brands I've seen. All the same features. It is the same weight as my 6. A crude copy to me but this guy has been playing it for several years and has had nothing unusual happen in repairs or wear. It needed a bit of initial setup but it's rather good. He paid under 1000 bucks.
 
The biggest operation or factory in China making saxes has been making " Mark vi" models with necks that fit a 6 for several years.
Not to mention a very good Ref 54 and Series II. Is there a Supreme yet?
I believe many of the horns in the boutique market are either made and assembled in China
No surprise there, I think we all know that.

or from Chinese parts.

Assembled form Chinese parts is less likely. Instruments in China are to a great extent hand-made, lacking the precision and consistency of the more mechanised processes in Japan, so it's important to assemble in the factory with a high quantity of parts so that they can make sure they all fit and reject the over/undersized or misshapen dodgy ones.

If they were to just send out parts to be assembled it could be a complete nightmare for the assembler. Hence generally what's imported is an assembled horn with all the parts fitting. The importer may then disassemble and reassemble which allows the description "assembled in - insert name of non-China country" Some have even gone so far as to say "made in..." but I'm not mentioning any names.

Some importers may import the saxophone minus pads because that is a bit cheaper if they are going to put in new pads anyway - but same process, they know all the bits and pieces will actually fit.

This is the secret to selling a quality boutique product that technically may have a 1500% markup but so what? It's ends up being a good instrument and everyone is happy.
 
I think you are spot on, Pete. "Assembled" could be used to describe anything , really. I have heard that some of the larger brands with parts from Taiwan just get the horns whole and take them apart to some degree as necessary to make the horn fit well. So, one might assume others are also doing just that. I also agree that if someone is happy with the horn and can afford it , se la vie. But, the sausage making is kind of interesting.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,681
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom