Mouthpieces Mpc moving up?

prelude1

Member
Messages
66
is 063 to 076 too big of jump for a sax mouthpiece opening tip. Im currently playing a YAM4C…lookin at a Meyer 6m…..maybe 5m. Suggestions welcomeplease.
 
Phil Woods played a Meyer 5. A modern Babbit Meyer 5M has a tip opening of 0.071 and I think the new Drake Phil Woods, a copy of Phil Woods Meyer, has a tip opening of 0.073 which matched Wood’s mouthpiece.
My mistake, the Phil Woods mpc was 0.075, very nearly the same as a modern Meyer 6M.
 
is 063 to 076 too big of jump for a sax mouthpiece opening tip. Im currently playing a YAM4C…lookin at a Meyer 6m…..maybe 5m. Suggestions welcomeplease
You cannot generalise re: tip opening size as facing length/curve have as much to do with the resistance.

In some cases a 063 could be “equivalent” to 076 or 055
 
There is no right or wrong answer. It's probably a sound (no pun intended) choice overall.
For sure a 4C is at the smaller end of what suits most people and a 5M or 6M Meyer are by no means extreme in terms of opening.
Taking on board @Pete Thomas comments, though it will be different from the 4C, a Modern Meyer 6M should not present any major problems and anything that is strange to you could be mastered in a reasonably short period of time.
Bear in mind if you don't already know, they do come in more than just 'M'
- The letter M in the diamond on the table would stand for 'medium lay' facing.
- The Chamber size is stamped on the shank as 'Medium Chamber'

I didn't see a reason posted as for why you wish to change?

Rather subjectively I would say that being produced by Babbit, 3 Meyer 6M's in a room will all differ more than 3 Yamaha 4C's would.
 
Last edited:
And anyways we know that the differences can suit different people (There must be 6M for everybody I reckon :clapping: )
Looking at Meyer specs, I guess one could say my recent Bari brand tenor mouthpiece is my 6M. :sax:

My newly purchased a D'addario Rico Metalite M7 tenor sax mouthpiece,
  • Tip opening: .095" (2.41 mm)
  • Facing length: 23mm
  • Chamber: Medium
I gather is possibly closer to a Meyer 8M or 9M.

There's sufficient variance in each other's embouchure due to mouth size, shape, teeth structure (or lack thereof), jaw shape, thickness of lips, muscular strength, lung capacity, endurance and etc., will provide mouthpiece & reed strength discussions to eternity.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,062
Messages
578,399
Members
8,129
Latest member
Bartman
Back
Top Bottom