Accessories MP Pads - how to get it to stick

outzen

Member
Messages
13
Location
Denmark
Im using metal mouthpieces and find that mp pads often starts sliding out to one of the sides (typically to the left) after only a few weeks. Guess its a question on preparing the metal for the glued pad with some kind of chemical - or just hot water and soap? Any recommendations (and how long does your pads stay on the mp before you have to replace them)
 
It's nothing you are doing wrong.
They should just stick to a generally clean mouthpiece.
However some have very poor adhesive.

Try these
I have linked the Bb tenor size ones but they also do Eb alto size.
I swear by them.

 
Im using metal mouthpieces and find that mp pads often starts sliding out to one of the sides (typically to the left) after only a few weeks. Guess its a question on preparing the metal for the glued pad with some kind of chemical - or just hot water and soap? Any recommendations (and how long does your pads stay on the mp before you have to replace them)
I use BG small mouthpiece pads. Clear or black. 0,4 mm, 0,8mm or 0.9mm. I use two pads instead of one. I just replace the top pad and I replace the pad before I'm through.

  • Small or large? The mouthpiece decide. Or your teeth .... . Less than 10 mm of my front teeth are resting on the pad. So I always use small pads.
  • Clean the beak on the mouthpiece. I use lukewarm water and soap. No dirt or grease before you put a mpc pad on the mouthpiece.
  • I clean my mouthpiece and mpc pads after I've played and I dry them as well.
  • Black mpc pads gives me more comfort than clear. Black mpc pads are softer than clear mpc pads.

IMG_4832.JPG
 
Alcohol or lighter fluid for cleaning. This will remove oil and glue residue

I use a roll of UHMW tape for mouthpiece patches, I put one on my Phil-Tone Tribute, which has plain metal, no bite plate, when I bought it several years ago. Same patch is still on. It’s probably time to change it, I noticed a minor tooth ridge when I was playing it today.

The tape is 3/4” wide and 5 yards long. One roll will last a lifetime. If you are a mouthpiece collector (think Pharoah Sanders) you might need two rolls… It’s 10 mils thick (0.010” or about 0.25mm). I think it also comes in 5 mil thickness.
 
Thks - have just cleaned with hot water and then alcohol - have 3 or 4 packs of pads - will try to work with these before consider replacing - going for the double pad approach if I experience the same issues 🙂
 
These type of adhesives may need a full 24 hours before the first use.
Although not recommended for health reasons, some have tride solvent contact adhesives. Sticks for a long time.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,525
Members
8,132
Latest member
LouisJR
Back
Top Bottom