Saxophones Looking for more info on a Martin Indiana Alto

LimaBean

New Member
Messages
1
Location
New Jersey
Hello, I have (what I believe to be) a 1930 Martin Indiana Sax and was looking to find more information on it. I did a bit of digging and was able to narrow it down to the year based on it only having a 4 digit serial number. See link for serial list: The Martin Story - Serialnumberlist

The saxophone was given to my mom about 30 years back and while I was able to find quite a bit about the Martin Indiana saxs I can't find much about the phase I instruments. Would anybody be able to tell me anything more about it? As far as condition goes I don't know much about saxophones but it's sat in an attic for a long time.


3
3

3
3
 
Not a whole lot of info about these, if a Phase 1 it's a split-bellkey horn, not highly sought after, late 30's-early 40's. Not sure if they had Front F's or not.
MartinStory claims them to be rebranded Handcraft Phase 2's...

Splitbell Martins are quite alright, as far as players go. People go gaga over Conn New Wonders, but IMHO a splitbell Martin is as good a horn.

Market value will be quite low, however, as they never achieved the reputation of the Conn nor Buescher splitbells from around the same era.

One in project condition, non-playing... worth maybe $150 on this side of Pond.... one in good, clean play-shape perhaps $350-400 here.

I do realize that American vintage horns over there tend to have higher market values than here.
 
The Indiana Band Instrument Co was formed by Martin in the late 1920's as a way to sell second-tier instruments. Indianas were built by the same workmen in the same factory as the first-line Martin instruments but using tooling from a previous generation horn and reportedly built in a quicker tempo.

As @JayNM says, the first Indianas were essentially re-badged Martin Handcrafts. These have split bell keys (i.e. one key on either side of the bell). Then there was apparently a period in the late 1930's when the first line instruments became Committee's and the Indianas reportedly used the Martin Standard tooling. These will have the bell keys on one side. All these pre-war instruments were branded IBICO. The post-war Indianas were branded Martin.

A pre-war Indiana is quite rare, and it should be a good instrument, but sadly not worth a lot. If it needs a lot of work (e.g. a complete re-pad) to get it into good playing state then the cost of the repair would probably be more than the value of the repaired horn.

Pictures would be interesting.
 
@LimaBean
@nigeld thread on this subject.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,681
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom