Saxophones Liberty Conn?

So is that a good thing about the engraving? & if so what do u mean & why & what does that say???
U said significantly worth more...what do I mean by that?? & if it is a "curvy" & on pretty good condition with case, what would it be worth??? (I'll look into posting some pictures. K)
Hello, Glad to see you back, we love deciphering mysteries here 😉

~ A curvy vintage soprano is worth more than a straight one which is keyed the same.

~ A lot of vintage 'stencils'....this means a horn MADE by a certain MAJOR factory but engraved with a name OTHER than the original factory ...are not as valuable AS the exact same horn engraved WITH the original factory name (bizarre but true - exact same instrument design, in exact same condition, just different name on it, will be worth less than one with the major brand name on it).
IF yours reads CONN - and it turns out it IS a Conn (and I am pretty sure it's a Pan American, which IS in fact by CONN) then it'd be worth a few hundred more on the used market because it has the Conn name in the engraving or stamp.

~ Photos, please. Snap the pic, post it on this thread simply by going to the top menu bar in the reply window and clicking the photo icon.

~ Value...IF I am right on this and it's a PanAm/Conn 1925...it SHOULD be keyed up to high F....which would be good news because again, its value is higher.
If it is keyed only up to high Eb (many vintage sopranos were and around 1925-ish is where that changed) it will lose some market value because it is absent a couple of keys which are common keys on a sax nowadays.

So we still dunno for sure ALL its drawbacks or pluses as far as market value until we see those pics.
So far: it's Low pitch, it's (likely) a Conn-made curvy soprano, likely from 1925....the first two are PLUSES, the third is a 'maybe good/maybe not'...

Pic of entire instrument, both sides, pic of the engraving, and a few close-ups of the body and keys is what we'd like to see 😎
 
Last edited:
And just what do u mean by "hit the high road"?
Again glad you came back...."hit the high road" = "the person left, isn't returning" 😉

Oddly, not uncommon on musical instrument forums...a person (new member) will post a question...people will begin to reply with what they can do to help, and as in this case ask for additional information from the OP ("original poster" - the person who originally asked the question)....

....but the OP is gone, never to reply again...so the mystery is not resolved, and questions remain, OP ends up only with partial information....and oftentimes we never get to see the horn in question....so can never really accurately answer the question....

(Glad to see you didn't Hit the High Road ....)
 
Last edited:
Again glad you came back...."hit the high road" = "the person left, isn't returning" 😉

Oddly, not uncommon on musical instrument forums...a person (new member) will post a question...people will begin to reply with what they can do to help, and as in this case ask for additional information from the OP ("original poster" - the person who originally asked the question)....

....but the OP is gone, never to reply again...so the mystery is not resolved, and questions remain, OP ends up only with partial information....and oftentimes we never get to see the horn in question....so can never really accurately answer the question....

(Glad to see you didn't Hit the High Road ....)
Now we are going off topic.

There must be reason(s) why a OP "hit the high road". I've "hit the high road" myself.
 
If a person answer with something that I don't understand or with a joke ..... I hit the high road. Maybe there is no answer so don't write anything at all.
 
Well yes.
If it says 'made FOR Conn', rather than 'made BY Conn', then ... it wasn't made by Conn
But Conn had their own factory, and did make stencils for other companies, why would they have an instrument made elsewhere and branded as Made for Conn ? The plot thickens!
 
If OP decides to come back and supply some photos it'll be pretty straightforward to determine if it was made by Conn.

My bets are on either the engraving being misread, or an error in the engraving. Yes, engraving errors do occur. I played for some time on a King baritone sax that was clearly engraved "Made by H.N. Whit Cleveland, Ohio".
 
Yes I'm sure...it says made for Conn...does that make a difference?

Well yes.
If it says 'made FOR Conn', rather than 'made BY Conn', then ... it wasn't made by Conn
I'd usually agree with that, except the serial # truly suggests it's a Pan Am, which was in fact made by Conn, at Conn.

And as Pete says...it'd be unusual for a horn with a separate stencil name of Liberty to read 'Made for Conn' but be made by Buescher, etc...not impossible I suppose, but quite unusual...

This is why a photo or two or three will tell all and allow us to arrive at a solid answer.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,576
Members
8,133
Latest member
walthang
Back
Top Bottom