That’s quite possible, and if you know what you are doing and can evaluate the results no reason at all to not try it. But the other way round may be more problematic.
Very generally if a reed has been on a wide tip then it may not work too well putting it on a narrower tip (but depending on the facing curve) But tip opening is only part of the equation. It could also be problematical going from a short facing to a longer one.
So for example I have switched reed (Legere 2.25) from an 11 to a 7* and it was just unplayable so I just kept that specific reed for the 11. But switching from a long facing 8* to a short facing 7* no problem.
But in general my advice would still be that it can be hit and miss so if it matters for a performance I wouldn’t do it without being 100% sure it was working as well as it should.
In other words if in doubt have a reed for each mouthpiece.
But better advice would be just use one mouthpiece and stick to it. There is rarely any need to swap mouthpieces around unless you are testing them.