Mouthpieces Lawton Mouthpieces: Researching the History

Noticed an earlier post comparing lengths. Here is my old 8 next to the newer 8*BB:
Lawton8_BB.webp


Now I'm not positive which goes with which ... but the one with slotted screw seems to fit best on the older 8 and common sense tells me the phillips head is probably the newer one - does that agree with your collection?
1653945597522.webp
 
Interesting - I think that all the ligatures I have use Phillips head screws but I will check.

And interesting too about the shank lengths.

Does the Bronze one have "Special" or "Bronze" stamped on the opposite side of the body to the Lawton name ?

And do the letters for "Lawton" seem to be the same height (can you check how long the word "Lawton" is) ?

Rhys
 
I have two Geoff Lawton's and they both have phillips screws. It makes more sense to me, if that's the right word, that Geoff would use cross head screws.
 
The older 8 was used when I bought it in the late 70's (and I'm pretty sure it is the one with the slotted screw). It was in the case with an old tenor I bought at a Pawn Shop in USA - I knew what Lawton was and I only bought the horn to get the mouthpiece and then sold the horn. There were a few players in town that knew about Lawton and ordered them from England directly - I'm guessing this horn had belonged to one of those guys.

The 8 Star BB has nothing on the other side. the word LAWTON measures 13mm
Lawton8StarBB.webp
 
Last edited by a moderator:
I suspect my plain 8 tenor is a very early one. I measure .112 tip opening to the front edge of tip rail (Guessing he measured to the inside edge of tip rail for the spec sheet) ... and I measure facing length at 1.058 to my .0015 feeler (maybe he measured to a .002 feeler?). The facing is unmolested and original.
 
I'm curious if anyone else finds a slotted screw ligature. Do any of you have mouthpieces you know are from the early 70's?

Have you measured the facing length? My older tenor 8 has a longer facing than the newer one.

I looked at the ligatures on my three Lawton-Barton pieces (stopped when Lawton started in October 1965). Two of these have slotted screws and one appears to be Phillips but is so corroded and mangled that I'm not certain !

I checked another 24 Lawtons that I have and all of the ligs have Phillips head screws, many of which are slightly domed (possibly the newer ones ?).

Rhys
 
Interesting that you found slotted screws on the Lawton-Barton pieces from pre 1965. I'm pretty sure my Lawton 8 was originally purchased prior to 1973 and I'm guessing the slotted screws were an early thing. It plays better than other Lawton pieces I've had in the past and everyone who has ever played this one has commented on it. It isn't quite as bright/edgy as I liked when I was younger, so years ago I always played it with a slightly built up baffle made of beeswax to bring it up the B or BB sound. But these days I love how it plays - just the way Geoff made it 😀
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,686
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom