Mouthpieces Lawton 10* or 11 facing length anyone

I’ve got a Lawton 10* BBB; I wouldn’t know how to measure the facing length though.

You need a piece of clean glass. Place mouthpiece firmly table downwards (make sure table is also clean)
Slide a 1 thou feeler gauge under the tip and along the curve until it stops. This will be the length of the curve you can measure with a rule from tip to further edge of feeler.
 
You need a piece of clean glass. Place mouthpiece firmly table downwards (make sure table is also clean)
Slide a 1 thou feeler gauge under the tip and along the curve until it stops. This will be the length of the curve you can measure with a rule from tip to further edge of feeler.

"From the tip" - does that mean the outer edge of the tip rail ?

If you don't have a 1 thou' feeler gauge, perhaps you could use a single sheet of 80 gsm paper, which is supposed to be about 0.1mm or 4 thou' thick. That will slightly underestimate the facing length, but if you are using a rule to measure the length, it won't be very accurate anyway.

Rhys
 
This video from refacer Keith Bradbury (MojoBari) explains a bit about the measurement process and why the gauge historically has 1/2mm increments.

It's worth watching the whole thing, but I have linked to where the video starts discussing the glass gauge.


He says that the zero point is lined up with the outside edge of the tip[ rail.

Rhys
 
You need a piece of clean glass. Place mouthpiece firmly table downwards (make sure table is also clean)
Slide a 1 thou feeler gauge under the tip and along the curve until it stops. This will be the length of the curve you can measure with a rule from tip to further edge of feeler.
I’ll give it a go.
 
I know this is an old thread, but I'm sure someone will appreciate this ...

I have a 10 Star BB (with a sharp-cut Bullet chamber), 2.5 mm font (small font)
The lay length (facing length) from tip to back number is 1.063 in, or 27mm
 
I also measured the lay length for my 8 Star B (small font, soft bullet chamber), and it is 24 mm (.945 in) on the left rail and 25 mm (.984) on the right (whoops!). That's almost .968, if we meet in the middle. Geoff must have been in a hurry that day.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,074
Messages
578,647
Members
8,134
Latest member
banjo
Back
Top Bottom