Saxophones Kohlert "Best in the World" alto

Messages
16
Location
Newfoundland, Canada
I am 'considering' buying a Kohlert "Best in the World" alto bearing the Kielwerth letters inside the "Best in the World" logo with the serial # 245XX just above this logo. I just am having difficulty in nailing down the year of manufacture. Any Kohlhert admirers have any information on this horn? Thanks
 

Attachments

  • Kohlert 2.webp
    Kohlert 2.webp
    20.3 KB · : 397
  • Kohlert 1.webp
    Kohlert 1.webp
    16.8 KB · : 272
I am 'considering' buying a Kohlert "Best in the World" alto bearing the Kielwerth letters inside the "Best in the World" logo with the serial # 245XX just above this logo. I just am having difficulty in nailing down the year of manufacture. Any Kohlhert admirers have any information on this horn? Thanks
Not much to go on with these pictures. Kohlert & Sons. RTH. I’m guessing 1960’s. No real records on these for dating. Last of the brand had RTH 1960-1977. But the Best in World stamp goes way back.
 
Not much to go on with these pictures. Kohlert & Sons. RTH. I’m guessing 1960’s. No real records on these for dating. Last of the brand had RTH 1960-1977. But the Best in World stamp goes way back.
Back much further than I was aware of...try 1904😉. I did a little more "deeper" research.
 

Attachments

  • Kohlert 1904.webp
    Kohlert 1904.webp
    33.6 KB · : 164
  • Kohlert 24782.webp
    Kohlert 24782.webp
    38.7 KB · : 183
I think this is a sax made by Amati. They used a JKG (Toneknng) best in the world body stamped with "Made In Czekoslovakia". Probably pre WWII leftover. The engraving on the bell says nothing in the style of V Kohlert und Söhne, just Kohlert. I'm with PigSqueuler, I also think it's a sax made in the mid/late 50's. The value?. How well does I play. A sax like this use to go for 3000-5000 s e k her in Sweden.
 
it is a 1956 made sax, in that year they, as Amati did too, used the JKG best in the world logo (along with made in Czechoslovakia ) , they are not quite the same as the Keilwerth model, value is limited and would be more if it were a proper Keilwerth and less if it was stamped Amati ( why? well, what's in a name)




"....
“KEILWERTH” (1956): In 1956, Kohlert stenciled a horn, rather than producing their own. It’s an Amati Toneking stencil with a Keilwerth serial number. Confused yet?
At the end of WWII, Amati “nationalized” the Kohlert and Keilwerth companies and produced horns using, mainly, the Keilwerth tooling (very few used the Kohlert tooling -- see above). They kept the same Keilwerth model name, “Best in the World” stamp and serial number chart, even.
These horns are not the equivalent of “real” Keilwerth horns: the keywork is a bit lacking...."
 
I am aways in favour of continuing threads but sometimes this can generate confusion if it is not clear that a thread is a " general" matter rather than a particular one.

it may be possible for some moderato to create a new thread and take the last comments and put them there.

To add to the mix, there is also the fact that the same horn is being discussed in parallel on SOTW
 
It’s currently listed on Kijiji Canada @ $400CAD The seller has no intentions of shipping it whatsoever. It’s located in the Calgary area.
Our OP here is no longer interested. We’ve message each other off to the side. Someone in the area may score a decent buy.
Here’s the additional pictures from the listing.
25977882-A608-42D3-97D3-B296A0E7C820.webp

5BED207D-D754-4C3A-8C7F-E9340DF31059.webp

11DC8BF4-0A25-45F6-9A04-5B12E47E4F77.webp
57A73696-047B-4692-96DF-DF0ABE6E3317.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,662
Members
8,134
Latest member
banjo
Back
Top Bottom