Mouthpieces Identification help request

ESJohn

Senior Member
Messages
1,652
Location
Ohio USA
I'm trying to learn more about the mouthpieces that I own. Of the four, three are almost complete mysteries as to what type they may be and what strength reeds would be appropriate for each, as well as if there is any particular genres of music one might recommend to play with each.
I'd like to submit one at a time with information and photos, if anyone would care to assist.
This one should be more familiar with some of you, as it is a Selmer. The other two are unbranded. All measurements are in mm's. I don't have a precise measurement of the tip opening but have included a photo.
My guess is that it is a 4c, but know nothing else about it.
Thank you!

Length of entire mouthpiece: 9
Length from tip to rear of table: 7.3
Facing: 4
Table: 3
Facing width at tip: 1.4
Facing width at rear: 1
Material: Plastic

Please excuse me. Those numbers are cm!
Selmer One.jpg
Selmer Two.jpg
Selmer Three.jpg
 
Last edited:
A Selmer Goldentone. Nothing whatsoever to do with Selmer Paris, it's a basic student mouthpiece supplied with things like Selmer Bundy about 50 years ago. Very small tip opening, not my sort of thing at all. The sort of thing a complete beginner might put a 2 reed on, for a more experienced player maybe a 3 1/2. Use for learning the basics of playing a sax, or for subdued noodling about.
 
Don't sell the Goldentone too short. True, they're worth close to nothing, but internally they're a pretty good design and if you can carefully open the facing a bit, to something more useful for experienced players, they can be a good "epater-les-bourgeois" el-cheapo-that-outplays-the-fancy-name-brand for some people.
 
Here's a couple of links (get it? get it?) about hot-rodding the Goldentone...

 
Thanks to all!! Turf makes me wish I hadn't thrown out the Yamaha 4c that I had chipped.
Here is the second one. It's a bit longer than the others and has "USA" on side as shown. Other than that, there are no manufacturer markings that I can find.

Length of entire mouthpiece: 9.5
Length from tip to rear of table: 7.7
Facing: 3.8
Table: 3.5
Facing width at tip: 1.5
Facing width at rear: 1
Material: Plastic
 

Attachments

  • USA Three.webp
    USA Three.webp
    15.8 KB · : 204
  • USA Two.webp
    USA Two.webp
    23.3 KB · : 206
  • USA One.webp
    USA One.webp
    20 KB · : 215
  • USA Four.webp
    USA Four.webp
    25.3 KB · : 225
  • USA Five.webp
    USA Five.webp
    8.9 KB · : 217
  • USA Six.webp
    USA Six.webp
    12.5 KB · : 172

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,562
Members
8,133
Latest member
walthang
Back
Top Bottom