Tech/maintenance I need help - top octave hole

You have several options. 1) Check with your teacher to see if he/she has a band director repair kit with a pad (or water key cork) the size you need. 2) Take your sax to a repair shop. You may be able to get an "over the counter" repair without having to wait. Some will charge you a "minimum bench fee" regardless of what they fix. 3) You can go to Music Medic.com and order a few pads in the 7mm - 9mm range. Their minimum order is just $1 however free shipping doesn't apply to orders less than $20.
 
Ok so I was marching with my saxophone and the little rubber stopper that covers the top octave hole flew off and I can’t fix it I don’t know what It is called
Don't they teach you some basics about your instrument? :doh: Like how a saxophone works and pads are undeniably essential... Not rubber by the way. At least usually not!
 
My bad but it flew off
If this is an emergency repair try this. Make a little ball of cotton stick it in the cup (where the non-rubber thingy fell out of ) and wrap it with a little saran wrap. just do it around it a couple times loosely. The area needs to flex some where it meets the hole in the brass. That’s the neck octave pip.
It may last a day until you can get it legitimately fixed
 
Last edited:
Don't they teach you some basics about your instrument? :doh: Like how a saxophone works and pads are undeniably essential... Not rubber by the way. At least usually not! Well yes but I was out in the field getting ready for a football game doing drills and while playing the pad flew
off. Also yes it’s not rubber but I have no idea how to describe it.
 
Another emergency repair is a piece of tape over the octave hole. That’ll let you play the lower octave as usual, and then you can voice the upper octave.

Learning to voice the upper octave (playing the second octave of the horn without using the octave key) is a good exercise for developing control and tone.
 
I think on some instruments it may be rubber, or some material that looks like rubber. As we know, traditionally on most decent instruments it is a very small normal pad made from felt and leather. However cork is fine for something that small and an easy temp DIY fix with a bit of cork, a sharp knife and some glue.

It may also be possible to mould something with Sugru, anyone tried that?
 
I think on some instruments it may be rubber, or some material that looks like rubber. As we know, traditionally on most decent instruments it is a very small normal pad made from felt and leather. However cork is fine for something that small and an easy temp DIY fix with a bit of cork, a sharp knife and some glue.

It may also be possible to mould something with Sugru, anyone tried that?
Interesting! I do believe the student may have taught us something. I never thought of one of these actually being made out of rubber. Not a bad idea. I’ve seen many made of cork. I’ve made a few too. No different than the spit valve on a trumpet. I’ve never used Sugru.
 
It may also be possible to mould something with Sugru, anyone tried that?

Never tried it with Sugru, only with silicone. As Sugru is mainly silicone it might work here.

1 cut the remainder of the leather from the top of the pad. Keep the felt and leather remains glued to the cup.
2 put cling foil thight on the octave pip
3 put a thin (<1mm)) ring of silicone paste (the type used for bathrooms) on the cling foil, The ring must be complete.
4 close the octave key and keep it in position until the silicone is hard.

Silicone sticks better to felt than to cling foil, so you can remove the cling foil easily.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,683
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom