Tech/maintenance How to fix sticky pads - stop them sticking

Solution
I use 1000 grit wet-or-dry sandpaper cut into a strip slightly wider than the tone hole. I wet the paper side with Naptha (lighter fluid) and pull it out from under the pad several times with light pressure with the paper side up. This cleans the surface of the pad and also the top of the tonehole. If this doesn't work, I remove the key, clean the pad again and rub a generous amount of fine teflon powder into the pores of the pad and brush/blow away the excess. If the pad sticks again after that process, it gets replaced.
Lots of misspelling and other things. It's so stressy. I hurry to press the post botton before I get the "Sorry, you run into problem" ..... message and options to solve my connection problems.
 
Vote:
Upvote 0
Pad paper wo powder is also fine! Some kind of padswab/pad dryer is also good. It not the paper that make pads less sticky. You should take of the pads on regular basis (after every time you have been playing, once a week ....) and not wait to the sticky pads is a fact.

Instead of paper I use this:
View attachment 16087
I haven’t yet taken off a pad/key. Sounds like a lot of work on a weekly basis.
How long does it take?
 
Vote:
Upvote 0
Lots of misspelling and other things. It's so stressy. I hurry to press the post botton before I get the "Sorry, you run into problem" ..... message and options to solve my connection problems.
What happens if you go back and edit the post ? Contact a mod for help. Something is not right.

Most of this thread covers DIY tricks.
Like your suggestion what about the purpose made goods ? Yamaha makes quality products. Anyone use the Yamaha pad cleaner or pad powder papers ? Other brands ?
 
Vote:
Upvote 0
You should take of the pads on regular basis

My mistake. "You should dry/swab the pads on regular basis". The Martin HC (Comm I) is my best Martin sax. One of the guys at TM that made the renovation. So that's why I'm so picky with the pads. Also slightly oversized sterling silver resonators/reflectors. I bought it in 1995 and it's fantasic player.
 
Vote:
Upvote 0
What happens if you go back and edit the post ? Contact a mod for help. Something is not right.

Most of this thread covers DIY tricks.
Like your suggestion what about the purpose made goods ? Yamaha makes quality products. Anyone use the Yamaha pad cleaner or pad powder papers ? Other brands ?
PadStick, BG pad dryer/swab, Yamaha Pad paper, Spit Sponge ..... or a strong kitchen paper are pretty much doing the same job. They keep the pads dry and clean.
View: https://youtu.be/vgmvb2BV0jc


I choice , if possible, products that is not made in PRC.
 
Vote:
Upvote 0
... just one reminder, make sure to get cigarette paper without the glue at the end. or else slice that glue edge off before using it. we want the paper, not the glue on the pads.
I've been looking unsuccessfully for unglued cigarette papers. It's a nuisance having to cut the sticky part off. Do you know of an online source for them?
 
Vote:
Upvote 0
I've been looking unsuccessfully for unglued cigarette papers. It's a nuisance having to cut the sticky part off. Do you know of an online source for them?
No, but I haven't looked that hard. I don't mind cutting the sticky part off once every many months when I replace the paper.
 
Vote:
Upvote 0
What brand ? I’ve never bought them.
never really payed attention to the brand. but now that you asked, the one have been using is called Zig-Zag. they come in a neat small cardboard dispenser. one box will last years. again, I think the main benefit of these is that they are very thin and malleable, so they will the least interfere with the crease on the pads. my theory is that if you use thicker paper it will tend to flatten or widen the crease potentially leading to less good a seal over time. that's my belief and I'll stick to it 🙂
 
Vote:
Upvote 0
If you find out then let every other sax player know.

Failing that you can try cleaning them with lighter fuel on a cotton bud or water. It depends on what's making them stick. I would recommend particularly not drinking beer at a gig. Advice that I wilfully ignore. Same goes for coke (the drink, that is) and other sugary drinks.
make sure you gargle with a vodka chaser after every pint....works for me but I dont gig...
 
Vote:
Upvote 0
I bought a couple of cheap key leaves from china....leave the sax on the stand after cleaning with the normally closed pads open....it helps a bit...needed 3 sets from china came in at less than a set of key leaves.. TBF the quality isn't as good but they will do the job.....
 
Vote:
Upvote 0
Sometimes a combination of two factors can cause unexpected stickyness, In an old symposium on eye surgery I found a warning not to mix Fluorocarbon with silicone oil. { Interaction between perfluorcarbon liquid and heavy silicone oil: risk factor for "sticky oil" formation - PubMed}


Now teflon spray can contain PTFE which is a Fluorocarbon.

Silicones are used as a coating for pads, ,as pads, as an anti-stick agent and as water proofing treatment after seating pads.

Not using PTFE with silicones seems a good idea, However not all uses of PTFE and material used in pad coatings are declared.
 
Vote:
Upvote 0

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,648
Members
8,134
Latest member
banjo
Back
Top Bottom