Tech/maintenance How to fix sticky pads - stop them sticking

Solution
I use 1000 grit wet-or-dry sandpaper cut into a strip slightly wider than the tone hole. I wet the paper side with Naptha (lighter fluid) and pull it out from under the pad several times with light pressure with the paper side up. This cleans the surface of the pad and also the top of the tonehole. If this doesn't work, I remove the key, clean the pad again and rub a generous amount of fine teflon powder into the pores of the pad and brush/blow away the excess. If the pad sticks again after that process, it gets replaced.
I bought a little pot of PTFE powder whilst in Florida a few years back. @jbtsax will no doubt know who sells it. I can't recall! Couldn't find it here, but that was maybe 6-7 years ago.
Try lighter fluid first. I've also used the fine emery paper trick, pulled between pad and tone hole (abrasive side to hole), then clean rim before closing pad.
 
Vote:
Upvote 0
Sticky pads on saxophones and clarinets can be maddening at times. Well okay........ALL the time.
Since I'm both a player and do repairs as well, I'll echo what John said above regarding Naptha. It works for me most of the time, but when a pad just gets stupid stubborn sticky (like literally again 5 minutes after I give it a healthy dose of Naptha applied with a Q-tip to both the pad and tonehole area), I either remove the key from the horn and give it a more thorough cleaning (which usually works) or I simply replace the pad.
I realize that's probably not an option for you so I have one other suggestion...
First off, make sure the pad and tonehole areas are DRY after playing. Go and buy some cigarette paper. Insert one between the pad and tone hole and put the horn in the case. Again, make SURE both the pad and tonehole are free of "moisture" from playing as any moisture that gets on the cig paper can cause a mess. The cig paper is VERY thin yet keeps the relationship between the pad/tonehole unaltered. I've known some guys who have used a business card in the same fashion, but they're thicker and often have a glossy side that can create a worse situation if moisture gets on it while between the pad and tonehole. It works for me but I only do the cig paper thing as a last resort.
Lastly, there's a product out there called "Key Leaves" that basically holds the key open while in your case. That's probably the best solution as we never seem to fuss with sticky pads/keys that are normally open and not making contact with the tonehole while the horn is in the case. The bad news is that (at least I feel) they're expensive and I personally can't justify spending that much money for something like that.......yet!
Oh, one last thing.......do NOT get any Naptha on the body of your clarinet (wood or plastic). It'll "haze" the area it comes in contact with. Saxophones are fine (both lacquered and bare brass).
Sorry for the long winded response... ;-)
 
Vote:
Upvote 0
Oh, one last thing.......do NOT get any Naptha on the body of your clarinet (wood or plastic). It'll "haze" the area it comes in contact with. Saxophones are fine (both lacquered and bare brass).
Sorry for the long winded response... ;-)

It's a temporary discolouration - it basically dissolves the surface oils, but they creep back soon enough. Rubbing the affected areas with a finger is usually enough to speed things along.
 
Vote:
Upvote 0
Thanks, that was helpful, I have found sources for ptfe powder...
Would it be also possible to use Isopropyl alcohol? Because I ha it here, and no lighter fluid...
Naptha will do a better job than alcohol.... it evaporates more quickly. I don't know any techs who would sue alcohol as a stand-in for naptha.
 
Vote:
Upvote 0
Another technique I find useful is to pull a strip of 1000 grit wet or dry paper between the pad and tonehole using light pressure with the abrasive side down. It cleans and "polishes" the top of the tonehole at the same time. Occasionally when a pad still makes a sticking sound after cleaning it is due to a "burr" on the edge of the tonehole created by filing.
 
Vote:
Upvote 0
Thanks, that was helpful, I have found sources for ptfe powder...
Would it be also possible to use Isopropyl alcohol? Because I ha it here, and no lighter fluid...
It certainly won't do any harm, but it's not as effective as cigarette lighter fluid because it's the wrong kind of solvent for the stuff that makes the pads sticky.
But if it's all you have for now you can try a bit of soapy water (or saliva) on a cotton bud or bent-double pipe cleaner, then follow up with the IPA.
 
Vote:
Upvote 0
It certainly won't do any harm, but it's not as effective as cigarette lighter fluid because it's the wrong kind of solvent for the stuff that makes the pads sticky.
But if it's all you have for now you can try a bit of soapy water (or saliva) on a cotton bud or bent-double pipe cleaner, then follow up with the IPA.
Yes Stephen, you're correct! My apologies. I should've been more clear in my long winded missive! Reason I warned about that is if the OP happened to dump quite a bit of Naphtha on the body of the horn instead of just a drop or two from a Q-tip/cotton bud.
By the way, I just realized we've all been spelling Naphtha wrong! I wondered why I was always getting the dreaded red line under that word so I looked it up......hell, I even looked at my bottle to confirm! :rofl:
 
Vote:
Upvote 0
Hello, I have time and again problems with sticky pads (most notoriously Bb-key, g#-key, and the octave key of my Yamaha Bass Clarinet, the last being the worst).

Would it make sense tu use some kind of lubrification like silicone or teflon or graphite to diminish their tendency to stick closed?
Also be careful of what you eat or drink prior to playing. Sugars (soft drinks) and foods that contain starches can be cause. This may eliminate the necessity for your need of fixing.
 
Vote:
Upvote 0
I use paper in between the pad and tonehole when the sax is not in use. Not cigarette paper (too thin) and Not a business card (too thick). Something like a piece of simple plain A4 printer paper cut too shape. I worry that a too thick card will lose the shape and "indent" of the toneholeedge on the pad, thus losing a good seal when playing.
I had a particularly stubborn alto where both normally closed large pads would stick terribly. This was a cheap sax and I gigged it hard. Cured it completely when I started using paper as I describe.
 
Vote:
Upvote 0
Thanks everybody. I now have lighter fluid (naphtha) and Isopropyl alcohol. I use coffee filter paper (popular in German for making coffee) that is quite robust, and clean the pads with it by putting a few drops on the paper and gliding the paper between pad and tone hole. The sticking completely ceased (for a while, I guess). I will try this paper for the close keys as well, thanks for that idea.

best wishes, take care
 
Vote:
Upvote 0

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,650
Members
8,134
Latest member
banjo
Back
Top Bottom