Saxophones Have you ever seen Yamaha yts 62 in antique copper finish?

bukiki

Member
Messages
6
Location
Czechia
Hello, Im just getting into the saxophone brands and models world. Ive come across this yts 62 in this finish and for few days Ive been trying to find some more info about this horn. The owner says he doesn't know when the horn was made since he is second owner. I wasn't able to find any other pictures of yts 62 in antique finish on internet(only some Chinese aliexpress thing) so Im clueless. Does any of you guys know if they actually made 62's in this finish? or when it might have been made?
Thanks🙂
IMG-20220215-222726-scaled.jpg
IMG-20220215-222807-scaled.jpg
IMG-20220215-222750-scaled.jpg
 
Last edited:
That's not a Yamaha factory finish; somebody's taken that thing to an autobody shop and had it sandblasted.

I doubt whether it's even a Yamaha instrument.

I MIGHT give $100 for it if it plays well (what's the chance?)
 
That's not a Yamaha factory finish; somebody's taken that thing to an autobody shop and had it sandblasted.

I doubt whether it's even a Yamaha instrument.

I MIGHT give $100 for it if it plays well (what's the chance?)
Well i thought so, it's very strange he also sells lot more stuff that seems legit, also few other 62's in gold lacquered finish, he is charging 2500$ for them...
 
he doesn't know when the horn was made since he is second owner

he also sells lot more stuff that seems legit
... So, not so much owner as dealer?

I'd suggest searching for "yts 61 serial number", find a model close and compare details...
Eg

 
I'd suggest searching for "yts 61 serial number", find a model close and compare details...
thanks will try, I have been able to find some other unlacquered custom Yamaha models, but no 62 tho, all with the similar serial number are with gold lacquered finish so... also the neck logo is strange
 
To sand blast a horn it would need to be stripped and reassembled. If the standard of work isn't up to scratch it could be a money pit.

Looking at the limited pictures, the horn itself doesn't ring any obvious fake alarm bells for me.

Having said that, a 62 is a top notch, well built horn. I can't imagine what circumstances brought about treating it this way. I would think it's value has been greatly reduced and it's playability remains suspect.

It may or may not still be a great horn. It may or may not be a wall ornament.
 
To sand blast a horn it would need to be stripped and reassembled. If the standard of work isn't up to scratch it could be a money pit.

Looking at the limited pictures, the horn itself doesn't ring any obvious fake alarm bells for me.

Having said that, a 62 is a top notch, well built horn. I can't imagine what circumstances brought about treating it this way. I would think it's value has been greatly reduced and it's playability remains suspect.

It may or may not still be a great horn. It may or may not be a wall ornament.
Thank you for your answer.
 
A YTS62 normaly has some nice engravings, the pictures shows very slight traces of such engraving. If it was sandblasted (looks like it in the picture of the serial number) that would make the engraving very faint.
So it looks like sombody's project horn (see the sealed off high F# tonehole) that would make it worth a lot less than a normal 62.
A bit of a gamble at best I would think.
 
A very similar finish to the YAS-21 I had wet bead blasted. See: Bare brass temptation - Page 6 - CafeSaxophone Forum

As for how the finish ages over time... I've not seen mine for four months or so as it's been doing the rounds as a 'private' passaround amongst members here, fitted with my new pads for prototype testing (I'll update my "DIY pads" thread in the near future).

I too the opportunity to try the finish as the 21 had a veryscrappy original finish, needed new pads anyhow, and so came to me very cheap.

The 62 looks to be a MkI version, so in good original condition would sell for perhaps £1,500+ in the UK.
However, in that finish unless done well and repadded professionally one issue will be resale value as future buyers will be suspicious. If you can inspect it and it plays well and you intend to keep it, understanding the resale problem, then pay £750-1000. It is, after all, a well regarded pro Yamaha horn whatever it's currently wearing. You can also expect it to develop a patina which will discolour it over time, maybe nicely, maybe not.
There's little you can do to prevent this in my experience. Even Renaissance wax, used by the British Museum to protect artefacts, did little to keep my bare brass Grassi tenor looking 'good' for long. But a lot of players like the 'lived a life' look.
 
A very similar finish to the YAS-21 I had wet bead blasted. See: Bare brass temptation - Page 6 - CafeSaxophone Forum

As for how the finish ages over time... I've not seen mine for four months or so as it's been doing the rounds as a 'private' passaround amongst members here, fitted with my new pads for prototype testing (I'll update my "DIY pads" thread in the near future).

You can also expect it to develop a patina which will discolour it over time, maybe nicely, maybe not.
There's little you can do to prevent this in my experience. Even Renaissance wax, used by the British Museum to protect artefacts, did little to keep my bare brass Grassi tenor looking 'good' for long. But a lot of players like the 'lived a life' look.

You can already see the spittle traces down the back of the bell. Blasting leaves a surface that is more prone to reacting to environmental conditions that polished bare brass.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,562
Members
8,133
Latest member
walthang
Back
Top Bottom