Saxophones Chu Berry alto crook tenon diameter

Got a NWii, nothing more accurate at home to measure it with.
20230109_185722.webp
 
Thanks for that - ties in with a measurement I already have. That said, I have a crook with a mangled tenon sleeve that seems to have a slightly larger diameter...so if anyone's got one of those, I'd appreciate the numbers.
 
I'll get back to you ... turns out it's quite difficult (for me anyway) to measure them while keeping the calipers square. Is it better to measure at the base, where the neck collar is?
 
Last edited:
For a cylinder of thin sheet metal like this, you need to measure at each end and in the middle, and crossed diameters. You want to capture out of roundness, taper, barrel, hourglass conditions.

Personally I'd rather use a micrometer as the large (relatively) 1/4" diameter anvils make it easier to get a good square measurement.
 
I'll get back to you ... turns out it's quite difficult (for me anyway) to measure them while keeping the calipers square. Is it better to measure at the base, where the neck collar is?
Best bet is a measurement across the middle, but failing that one across the end will do. It doesn't have to be precise...it's more of a ballpark figure I'm after.
 
Thanks for that - very much appreciated. +/- a few tenths of a mm isn't going to make any difference to the job I have in hand - but I'm mindful that some tenons were slightly larger.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,657
Members
8,134
Latest member
banjo
Back
Top Bottom