Saxophones CHEAPEST CHINESE BARITONE SAXOPHONE EVER?

Messages
52
Location
Langebaan, Western Cape, Za
Hi guys and gals!!

I am a South African living and working in Beijing China. I have been playing saxophone on and off for about 20 years.
In my country saxophones are very expensive. One of the many reasons that I have moved to China Beijing is because it is close to
Tianjin.

Now Tianjin is a coastal city that has a lot of saxophone factories...if you have ever bought a Chinese saxophone chances are it came from the coastal city of Tianjin.

I want to show you guys that you do not need an expensive saxophone to sound good. Also saxophone is compulsory in schools in Tianjin...isn't that great?

I have been playing Alto for 20 years, Tenor for 4 years and Baritone for 1 month... Take that in mind when listening to my Baritone playing.

Any tips or comments are welcome.

Here are some videos...All Saxophones were bought in China and came from the city of Tianjin.

Tequila Chinese Alto Saxophone Cover Cost of saxophone in Chinese Yuan: 3500 rmb

Chinese Baritone Unboxing Video Cost of saxophone in Chinese Yuan: 5400 rmb

My first song on my Chinese Baritone Saxophone! Cost of saxophone in Chinese Yuan: 5400 rmb

Yesterday Chinese Tenor Saxophone Cover song Cost of saxophone in Chinese Yuan: 2100 rmb

Let me know what you guys think of these Chinese saxophones.

My saxophone recording methods still need some work, but this is what I have so far.

Kind regards,

Eduan Steenkamp
 
Well, as long as the bore and tone hole dimensions are basically the same as the reference model, they'll sound just fine.

Are the posts and ribs securely soldered to the body? Are the ends of the hinge tubes square? Do the diameters of the rods meet those of the hinge tubes? Is there axial play in the mechanisms? Are the pivot screws of the proper ellipto-conical shape, or are they just straight rods? Are they properly finished or rough so they'll wear the ends of the keys rapidly? Are the sockets in the keys reamed to the same profile as the pivot screws or just drilled? Is all the end play in the mechanism set properly, or do you have to leave some of the screws loose so the keys won't bind? Are the key heights correct with proper (thin) and consistent cork under the feet? How's the lost motion? If it has the tilting low Bb, is the mechanism properly buffered with cork, Teflon, or other appropriate materials, or did they just spooge some heavy grease in there to make it quiet till the grease squeezes out at which time it's going to rattle constantly? Are the various screws made of good grade steel (or brass for a couple), or "extra-softium" which wears and breaks? Are the threads clean and well made, or rough and galled up? On the table keys, are the key-to-key gaps consistent and small, or inconsistent and too wide, so the tip of your finger can get hung up sliding from key to key? How many kluges are evident in the mechanism (example, bending things to clear other things because of inaccurate manufacture)? Is the neck closely and accurately fitted to the receiver? Are the soft materials of good quality, properly secured with adequate amounts of the proper adhesives, or will they fall off if you stare at them too long? Are the pads put in with a proper bed of shellac and floated to seal, or did they just put a wee dot of hot melt glue in the center of each one, stick it in, and then wet all the pads and clamp the bejeezus out of them to make deep rings that will kind of seal for a while, at least till they don't?

I'm sure Stephen Howard could add several dozen additional to this list.
 
The baritone looks very similar to my Thomann Startone that I bought it last black Friday which still plays great and looks good.
I paid £825.00 shipped. No idea how that compares in other currencies.
Both bear a striking similarity to the Sakussu that Stephen has reviewed.
 
The baritone looks very similar to my Thomann Startone that I bought it last black Friday which still plays great and looks good.
I paid £825.00 shipped. No idea how that compares in other currencies.
Both bear a striking similarity to the Sakussu that Stephen has reviewed.
Possible that is the same saxophone but has different branding on it? You can even order a saxophone with whatever name on it in bulk from some of these places. Some shops asked me what name do you want on the bell and the back?
 
No, but I am thinking about buying new ones and exporting them just doing research if it is actually worth it and if people are interested.
I don't think there'd be much profit in it for an individual. Yuan 5400 is about £670 at present. Once you add in VAT, shipping, VAT on the shipping, import duties, local distribution, marketing and so on, you're well over £1000 per baritone. That's cheap for a bari, but it puts you into direct competition with established brands like Thomann, which has a good reputation and customer confidence in its warrenty. I think you'd struggle to compete. There have been numerous attempts to establish new brands in Europe using Chinese manufactured saxes, even with quite large amounts of brand-establishing capital, which have failed.

You'd also be very much up against the innate prejudice against anything from China, which is very prevalent in Europe and the US. Unless you can use an established Western brand (in the way Chinese manufactured Conn-Selmer do) you would struggle to get public acceptance.
 
research if it is actually worth it and if people are interested.
If I should by a new Alto/tenor/baritone/brand from a new dealer I would do consider ......
  • quailty of the saxes
  • costs
  • service
If you are going to import saxes from PRC you must make them ready for the market/retailers. An employed good tech or an agreement with a tech that are doing service on your saxes. This is tricky. Can be a conflict. You need a quick/rapid service on saxes that you have sold and the techs work bench is full and more saxes are waiting. I know a guy who imported saxes from B&S, GDR. THeses saxes were rather well built. But new (better) pads, felt, cork and a good set-up made the B&S saxes even better. This was a one-man business.
 
I'm sure Stephen Howard could add several dozen additional to this list.
I could - but it would be largely pointless.
By far the biggest problem with Ultra-Cheap horns is consistency of manufacture.
We've seen it many times; someone brings out a new brand, it sells well and gets favourable comments given the price - and everyone's happy. Until the next batch turns up. There's no telling what you'll get - the horns might not even be made in the same factory as the last lot.
I've seen some great Ultra-Cheap horns down the years, but all those sellers have long since given up trying to run a business whereby their next shipment might turn out to be a whole pile of junk.
 
My family has a music school back in South Africa. No plans to export to Europe or America. Those countries got enough money to pay for the normal prices or import themselves.

I had my own country and family in mind and planning to take it from there, if enough students are interested...but no rush at all. COVID makes things a bit complicated at the moment.
 
I don't know how to say it ...... but I think some of these cheap saxes are todays second line saxes. Can be good saxes and unplayable in the container. The big brands/firm are working with PRC in a another way that a smaller dealer does. ISO, on the facorry several times/year., long contracts, ...... . And they can also press down prices.

Here is a video that tell us how difficult it is to buy cheap saxes. An ultra cheep bass sax (a copy of an amererican from the 20's) that didn't play in tune. Read how he got his bass sax to play better in tune.

View: https://youtu.be/_R43kY-VkEk
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,684
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom